Should these front brake discs be replaced?

Should these front brake discs be replaced?

Author
Discussion

saladdays

Original Poster:

114 posts

65 months

Monday 5th August 2019
quotequote all
This is a 2006 Honda Jazz (petrol auto). Should these front brake discs be replaced? The braking surface is 21mm thick, the minimum is 19mm. Are they too rusty? Some of the rust can be scratched off with a fingernail.
The discs are at least 20,000 miles and at least six years old.

Thanks.

Tasmin200

1,269 posts

187 months

Monday 5th August 2019
quotequote all
They look fine to me. Wire brush / chip off the loose rust.

HustleRussell

24,640 posts

160 months

Monday 5th August 2019
quotequote all
There is no need to replace those but I’d do it anyway because discs are cheap

Easternlight

3,427 posts

144 months

Monday 5th August 2019
quotequote all
As above clean up with wire brush, good for another 6 years.

saladdays

Original Poster:

114 posts

65 months

Monday 5th August 2019
quotequote all
Thanks. I'll replace the discs when the pads need doing.

GreenV8S

30,186 posts

284 months

Monday 5th August 2019
quotequote all
They're probably good for another 20k..

Make sure the center spigot is clean before you refit the wheels. With all the loose rust about it'd be easy to get dirt trapped under there.

stevieturbo

17,259 posts

247 months

Monday 5th August 2019
quotequote all
At 21mm plenty of life left, and if inner face is as good as the outer, then they're pretty good in general.

E-bmw

9,199 posts

152 months

Tuesday 6th August 2019
quotequote all
I have seen 1 year old discs look much worse than that, the surface looks very good & smooth with no ridges to speak of, if you are worried about the lip of rust at the edge, a quick dress up with a file will help come pad change time, but no, they are good.

Chris32345

2,085 posts

62 months

Tuesday 6th August 2019
quotequote all
Nothing wrong with them but I'd replace them same time as pads if the parts are cheep enough

Pericoloso

44,044 posts

163 months

Tuesday 6th August 2019
quotequote all
If there's no juddering and thickness is within manufacturers limit ,I'd leave those discs on the car.