SONOS Boost or not

Author
Discussion

Lovey1

Original Poster:

430 posts

181 months

Thursday 4th March 2021
quotequote all
When i updated so SONOS S2 I removed my SONOS bridge as required and connected to my BT Whole Home Mesh Network. However since then I have had the odd occasion when I have not been able to find one or more of the devices on the SONOS network and had to reset and reconnect each device (Yesterday was both SONOS Ones which was odd). Does anybody know if adding a Boost to the system would resolve the issue or its more likely connected to the change to S2?

Chester draws

1,412 posts

110 months

Thursday 4th March 2021
quotequote all
I found using a boost much better than trying to make them work on WiFi.

You could try plugging a speaker in instead of the bridge, if this works for you, a boost will likely be slightly better.

Freakuk

3,148 posts

151 months

Thursday 4th March 2021
quotequote all
I've got my soundbar hardwired into my router, since doing this all of my other Sonos speakers have been rock solid (3 play one's, 2 Play 5's and Sub)

Lovey1

Original Poster:

430 posts

181 months

Thursday 4th March 2021
quotequote all
Thanks. Yes has been my thinking. I never had an issue when I had the Bridge and the likely cause of the drop outs is interference. A separate SONOS network can only improve things.

CharlesElliott

2,008 posts

282 months

Thursday 4th March 2021
quotequote all
I think SonosNET (ie bridge) if your devices are close enough together for the mesh to work well and that would be my first choice. If you have 'better' WiFi coverage than the mesh can offer, then use WiFi.

It's the same problem with Sky Q, they think they are being clever by creating their own mesh but if the devices have some solid walls in between them, they just don't work. I ended up putting a Wifi bridge on one of mine just so they can use the WiFi (which is good!) - second one is hardwired.

h0b0

7,593 posts

196 months

Friday 5th March 2021
quotequote all
Do you have the original router and the mesh system running? If so, you may have a double NAT situation due to two devices providing ip addresses. In doing so the sonos components may be on the “same” network but not visible to each other.

This happened to me.

Lovey1

Original Poster:

430 posts

181 months

Friday 5th March 2021
quotequote all
h0b0 said:
Do you have the original router and the mesh system running? If so, you may have a double NAT situation due to two devices providing ip addresses. In doing so the sonos components may be on the “same” network but not visible to each other.

This happened to me.
thanks. i'll check

T1berious

2,259 posts

155 months

Monday 8th March 2021
quotequote all
If you're after a Sonos boost, I'm giving mine away (moved away from Sonos and still haven't got round to getting rid of the kit)

I.M. me if you're interested

a7x88

776 posts

148 months

Monday 8th March 2021
quotequote all
I’ve been debating picking up a boost too - with the increase of video streaming etc at home I’ve noticed the occasional issue as I’ve added more sonos devices.

There’s a great load of information here on the advantages of moving off standard WiFi and utilising SonosNet - either via boost or hardwiring one of the speakers.

link



Edited by a7x88 on Monday 8th March 08:14

Coolbananas

4,416 posts

200 months

Monday 8th March 2021
quotequote all
Freakuk said:
I've got my soundbar hardwired into my router, since doing this all of my other Sonos speakers have been rock solid (3 play one's, 2 Play 5's and Sub)
This.

Hard-wiring my Soundbar to the router solved all connection issues for me - all satellite speakers have worked flawlessly for the last 3 years. I have a whole new set of Sonos kit and TV for a new house I'm currently renovating and have made sure I can do the same there, hardwire to the router.

normalbloke

7,451 posts

219 months

Monday 8th March 2021
quotequote all
I thought the boost was all but obsolete now that you can hardwire any of the speakers to create the Sonos network?

CharlesElliott

2,008 posts

282 months

Monday 8th March 2021
quotequote all
That's true, if all of your devices are close enough together for the mesh to work. If not, you might need a Boost to fill in the dead zone.

Lovey1

Original Poster:

430 posts

181 months

Monday 8th March 2021
quotequote all
T1berious said:
If you're after a Sonos boost, I'm giving mine away (moved away from Sonos and still haven't got round to getting rid of the kit)

I.M. me if you're interested
Hi, I have sent an email. thanks

normalbloke

7,451 posts

219 months

Monday 8th March 2021
quotequote all
CharlesElliott said:
That's true, if all of your devices are close enough together for the mesh to work. If not, you might need a Boost to fill in the dead zone.
Surely that’s just an excuse to fill the dead spot with a juicy 5?smile

Chester draws

1,412 posts

110 months

Monday 8th March 2021
quotequote all
normalbloke said:
I thought the boost was all but obsolete now that you can hardwire any of the speakers to create the Sonos network?
Yes, but boost is smaller, cheaper, and sends a stronger signal than a Play:1.

I've wired my playbase, instead of a boost with the same result.