Elise S1 fitting a cone filter

Elise S1 fitting a cone filter

Author
Discussion

Fabio81

Original Poster:

23 posts

102 months

Sunday 28th October 2018
quotequote all
I was tired of the sewing machine noise of my Elise S1, so today I fitted a cone filter, hoping to improve the noise.
I'm not a mechanical guy, so 2 questions arose while fitting:
1. I only removed the top half of the original air box (and the original paper filter of course), is it sufficient for correct air flow?
2. tightening of the jubilee clip can cause sticky throttle issues? While revving down the motor seems to be a little hesitant around 1500rpm but quickly goes down. Haven't had the chance to test on the open road though (just revved up in the garage). On the other way if the jubilee clip is too loose i fear the filter would come off. What's your suggestion?

Thanks!

Fabio81

Original Poster:

23 posts

102 months

Sunday 4th November 2018
quotequote all
Update!
I tried the car on the open road and it makes a beautiful sound! :-)
But another question came to my mind: the cone filter is directly under the grills of the engine cover... would it be a problem if it gets some water? (rain, or washing the car)

Thanks!

flyinglotus

75 posts

139 months

Tuesday 6th November 2018
quotequote all
it will be fine, the water can not go directly through the filter, it can make it damp at worse, so long as you don't drive it through a lake hoping to imitate a certain secret agent.. then all should be well.

Ive

211 posts

169 months

Tuesday 20th November 2018
quotequote all
The air in the engine bay Near the intake manifold is up to 70°C hot in summer. You do not want a open air filter in this location unless you are happy to lose about 10 to 15% power.
If you like the sound, please a closed air filter like a Hurricane near the left air side air intake.
They are still noisy, but at least you won‘t lose power.
Wet cotton air filters are also really bad at filter air. The droplets transport the dirt through the gaze.