Discussion
PascalBuyens said:
T40ORA said:
d18mca said:
Pascal
Good to see it looking so well.
Once it's run in don't forget to give us some audio to go with the pictures.
Enjoy.(Give my best to all at RG when you see them.)
Davy mac
It sounds bloody amazing Davy. I'm sort of looking forward to a passenger ride in it. Just slightly scared though as it's going to be a beast...Good to see it looking so well.
Once it's run in don't forget to give us some audio to go with the pictures.
Enjoy.(Give my best to all at RG when you see them.)
Davy mac
PascalBuyens said:
Pascal, cracking looking engine you have there, and a brave man to put it into a Tuscan Mk 1, forget about the indicator's, get a hinged bonnet as a priority, would hazard a guess at £15k for the end result? hope the Nitron's keep it on the straight and narrow. If you need any help during the running in period would be happy to help out, no point in taking it all the way back to Belgium until its's fully tried and tested.
Tamster. said:
PascalBuyens said:
Pascal, cracking looking engine you have there, and a brave man to put it into a Tuscan Mk 1, forget about the indicator's, get a hinged bonnet as a priority, would hazard a guess at £15k for the end result? hope the Nitron's keep it on the straight and narrow. If you need any help during the running in period would be happy to help out, no point in taking it all the way back to Belgium until its's fully tried and tested.
dvs_dave said:
600 bhp target......impressive! What boost will you be running? Have you got a charge-cooler in there somewhere?
Charge cooler in there indeed (it's located underneath the radiator up front).600bhp is the least I want, I hope to have more... Haven't got a clue what the boost will be like in this config, but if I don't get to the hp I want, I'll change the pulleys
PascalBuyens said:
dvs_dave said:
600 bhp target......impressive! What boost will you be running? Have you got a charge-cooler in there somewhere?
Charge cooler in there indeed (it's located underneath the radiator up front).600bhp is the least I want, I hope to have more... Haven't got a clue what the boost will be like in this config, but if I don't get to the hp I want, I'll change the pulleys
So I presume that the ally airbox incorporates the heat exchanger? How is it incorporated into the airbox? Is it located where the panel filter is normally located in the standard airbox?
How are you planning on keeping engine temperatures in check? Has the cooling system been upgraded to cope with the extra power? I presume you're also going to have to ceramic coat the exhaust manifolds to keep engine bay tempertaures sensible?
Sorry, lots of questions.
Edited by dvs_dave on Friday 29th January 11:12
dvs_dave said:
PascalBuyens said:
dvs_dave said:
600 bhp target......impressive! What boost will you be running? Have you got a charge-cooler in there somewhere?
Charge cooler in there indeed (it's located underneath the radiator up front).600bhp is the least I want, I hope to have more... Haven't got a clue what the boost will be like in this config, but if I don't get to the hp I want, I'll change the pulleys
So I presume that the ally airbox incorporates the heat exchanger? How is it incorporated into the airbox? Is it located where the panel filter is normally located in the standard airbox?
How are you planning on keeping engine temperatures in check? Has the cooling system been upgraded to cope with the extra power? I presume you're also going to have to ceramic coat the exhaust manifolds to keep engine bay tempertaures sensible?
Sorry, lots of questions.
Edited by dvs_dave on Friday 29th January 11:12
Exhaust manifolds are treated with some tricky stuff as well, of which the name doesn't jump into mind right now (and thanks to Mr. Mircosoft I can't read back on the mails about it). Apart from that coating (that's why the manifolds are black), there are lots of heat shields everywhere around to protect the chassis too..
Trying to get omex's Richard on the phone, but so far no luck.. I want some numbers before the weekend
PascalBuyens said:
dvs_dave said:
PascalBuyens said:
dvs_dave said:
600 bhp target......impressive! What boost will you be running? Have you got a charge-cooler in there somewhere?
Charge cooler in there indeed (it's located underneath the radiator up front).600bhp is the least I want, I hope to have more... Haven't got a clue what the boost will be like in this config, but if I don't get to the hp I want, I'll change the pulleys
So I presume that the ally airbox incorporates the heat exchanger? How is it incorporated into the airbox? Is it located where the panel filter is normally located in the standard airbox?
How are you planning on keeping engine temperatures in check? Has the cooling system been upgraded to cope with the extra power? I presume you're also going to have to ceramic coat the exhaust manifolds to keep engine bay tempertaures sensible?
Sorry, lots of questions.
Edited by dvs_dave on Friday 29th January 11:12
Exhaust manifolds are treated with some tricky stuff as well, of which the name doesn't jump into mind right now (and thanks to Mr. Mircosoft I can't read back on the mails about it). Apart from that coating (that's why the manifolds are black), there are lots of heat shields everywhere around to protect the chassis too..
Trying to get omex's Richard on the phone, but so far no luck.. I want some numbers before the weekend
Dom
PascalBuyens said:
There is indeed no chargecooler installed yet in those pictures (taken a few weeks ago).
Can't let you have the "full monty" at once, can I?
glad you said that because that small charger wont make 250 bhp on top of your asperated power of 400 bhpCan't let you have the "full monty" at once, can I?
Dom
Edited by Tvr Power on Saturday 30th January 13:30
Tvr Power said:
PascalBuyens said:
There is indeed no chargecooler installed yet in those pictures (taken a few weeks ago).
Can't let you have the "full monty" at once, can I?
glad you said that because that small charger wont make 250 bhp on top of your asperated power of 400 bhpCan't let you have the "full monty" at once, can I?
Dom
Edited by Tvr Power on Saturday 30th January 13:30
stuthemong said:
Hey Pascal,
Sounds like it's getting close - really looking forward to more info / pics of it & hope it's all you hoped for
Stu
Pretty close, yes Sounds like it's getting close - really looking forward to more info / pics of it & hope it's all you hoped for
Stu
Thanks, certainly will put up more info soon...
As for the hoping: I think in the end it'll be more than I had expected
Edited by PascalBuyens on Saturday 30th January 17:25
Gassing Station | Speed Six Engine | Top of Page | What's New | My Stuff