V8V Fast road/ track build
Discussion
I bought an 07 V8 vantage manual
I wanted to build a different type of car and restore it
The plan: build a v8 vantage that handles better, stops better and sounds loud with a low stance and sensible build price
What’s been done:
18” GT4 magnesium O.Z. Wheels
10j front 11j rear
265 35 18 ad08rs
285 35 18 NS2R’s
I wanted semi slick options and these work well (I wanted AR1’s but finding the correct size was impossible)
Coilovers suspension with adjustable dampers and ride height including new top mounts
New track rod ends
New thermostat
Oil change
GT4 lightweight 6 pot brembo callipers with custom braided hoses and Dot5
Floating 380mm discs and YSL1 pads, trust me, the stopping power is incredible
Less aggressive but similar geo set up to a GT4
Tinted windows removed
Back box delete with GT4 straight through pipes
Genuine GT4 carbon fibre side skirts (not fitted yet)
Still to come:
Front end respray to freshen it up
Further boring servicing work
Cobra nogaro seats
Aston instillations Apple car play mod
Possibly a front splitter (purely for looks)
So yes there are numerous mods that can be done guided by many such as bamford rose and others but these are the modifications I wanted to go for. It’s not a daily so I’m not worried about it’s being quiet or comfortable etc
Hopefully I’ll have some more photos and updates for you soon
I wanted to build a different type of car and restore it
The plan: build a v8 vantage that handles better, stops better and sounds loud with a low stance and sensible build price
What’s been done:
18” GT4 magnesium O.Z. Wheels
10j front 11j rear
265 35 18 ad08rs
285 35 18 NS2R’s
I wanted semi slick options and these work well (I wanted AR1’s but finding the correct size was impossible)
Coilovers suspension with adjustable dampers and ride height including new top mounts
New track rod ends
New thermostat
Oil change
GT4 lightweight 6 pot brembo callipers with custom braided hoses and Dot5
Floating 380mm discs and YSL1 pads, trust me, the stopping power is incredible
Less aggressive but similar geo set up to a GT4
Tinted windows removed
Back box delete with GT4 straight through pipes
Genuine GT4 carbon fibre side skirts (not fitted yet)
Still to come:
Front end respray to freshen it up
Further boring servicing work
Cobra nogaro seats
Aston instillations Apple car play mod
Possibly a front splitter (purely for looks)
So yes there are numerous mods that can be done guided by many such as bamford rose and others but these are the modifications I wanted to go for. It’s not a daily so I’m not worried about it’s being quiet or comfortable etc
Hopefully I’ll have some more photos and updates for you soon
Why not go large on the brakes, get Surface Transforms to provide their CCM kit? They are supposed to be providing brakes for Valkyrie, so they know their stuff...
What's the weight difference between cast magnesium and a good forged aluminium wheel in that size?
Good project! Please keep us updated: -)
What's the weight difference between cast magnesium and a good forged aluminium wheel in that size?
Good project! Please keep us updated: -)
Nice project! There is a nice Scottish chap in Germany who is a dragon in preparing track-focused Vantages:
https://www.instagram.com/valiant_ecosse/
https://www.instagram.com/valiant_ecosse/
JohnG1 said:
Why not go large on the brakes, get Surface Transforms to provide their CCM kit? They are supposed to be providing brakes for Valkyrie, so they know their stuff...
What's the weight difference between cast magnesium and a good forged aluminium wheel in that size?
Good project! Please keep us updated: -)
Haven’t heard of CCM kits but I had to have a smaller calliper to fit the 18” wheels, so it made sense to run GT4 Brakes with the wheels. What's the weight difference between cast magnesium and a good forged aluminium wheel in that size?
Good project! Please keep us updated: -)
Weight wise, if I’m honest not huge difference (I haven’t weighed them) but semi slicks always weigh a little more
I’d personally rather a forged wheel as it’s easier to change colours etc, as mag is a nightmare to refinish
So after a few runs out in the car I have realised the floating discs are maybe a tad too hardcore for the road. They’re very noisy and I’m looking for a two piece disc (springs and shimmed bells) basically a road going two piece disc, anyone on here know of any?
Also it’s going in for paintwork so I stripped the front arch liners (so the body shop can access the side skirts easier) whilst I was there I did the door struts and air filters.
Cleaned the arch liners properly with TFR, tar and glue remover and I’ll dress them in Autoglym trim restorer once the car is painted
I managed the remove all the old black paint from the grills to return to standard, I will replace the nose cone decal with a less intrusive mid metallic grey one as I feel I’ll probably change the wheel colour to grey too.
I whacked my splitter trying to get into a friends driveway and broke half of it so I’ve ordered a maxton designs one (I’m sure many will cringe at that) but I felt it was a fairly unobtrusive looking one for now
Also it’s going in for paintwork so I stripped the front arch liners (so the body shop can access the side skirts easier) whilst I was there I did the door struts and air filters.
Cleaned the arch liners properly with TFR, tar and glue remover and I’ll dress them in Autoglym trim restorer once the car is painted
I managed the remove all the old black paint from the grills to return to standard, I will replace the nose cone decal with a less intrusive mid metallic grey one as I feel I’ll probably change the wheel colour to grey too.
I whacked my splitter trying to get into a friends driveway and broke half of it so I’ve ordered a maxton designs one (I’m sure many will cringe at that) but I felt it was a fairly unobtrusive looking one for now
Edited by Robinreliantreggie on Thursday 10th June 23:18
Edited by Robinreliantreggie on Thursday 10th June 23:51
Robinreliantreggie said:
So after a few runs out in the car I have realised the floating discs are maybe a tad too hardcore for the road. They’re very noisy and I’m looking for a two piece disc (springs and shimmed bells) basically a road going two piece disc, anyone on here know of any?
Also it’s going in for paintwork so I stripped the front arch liners (so the body shop can access the side skirts easier) whilst I was there I did the door struts and air filters.
Cleaned the arch liners properly with TFR, tar and glue remover and I’ll dress them in Autoglym trim restorer once the car is painted
I managed the remove all the old black paint from the grills to return to standard, I will replace the nose cone decal with a less intrusive mid metallic grey one as I feel I’ll probably change the wheel colour to grey too.
I whacked my splitter trying to get into a friends driveway and broke half of it so I’ve ordered a maxton designs one (I’m sure many will cringe at that) but I felt it was a fairly unobtrusive looking one for now
Thanks for the recommendationsAlso it’s going in for paintwork so I stripped the front arch liners (so the body shop can access the side skirts easier) whilst I was there I did the door struts and air filters.
Cleaned the arch liners properly with TFR, tar and glue remover and I’ll dress them in Autoglym trim restorer once the car is painted
I managed the remove all the old black paint from the grills to return to standard, I will replace the nose cone decal with a less intrusive mid metallic grey one as I feel I’ll probably change the wheel colour to grey too.
I whacked my splitter trying to get into a friends driveway and broke half of it so I’ve ordered a maxton designs one (I’m sure many will cringe at that) but I felt it was a fairly unobtrusive looking one for now
Edited by Robinreliantreggie on Thursday 10th June 23:18
Edited by Robinreliantreggie on Thursday 10th June 23:51
Great looking build! Great to see the progress!
For the discs I have a solution and have a few other parts that might solve your issues and may compliment what's there. Give me a call again and we can go through it!
Valiant-Ecosse said:
Thanks for the recommendations
Great looking build! Great to see the progress!
For the discs I have a solution and have a few other parts that might solve your issues and may compliment what's there. Give me a call again and we can go through it!
Thanks Alister, I’ll call you soon to chat about the car (I’m hoping to get across for the DN day at the end of august Great looking build! Great to see the progress!
For the discs I have a solution and have a few other parts that might solve your issues and may compliment what's there. Give me a call again and we can go through it!
Also I need wheel centre caps as it’s unsightly if I’m honest, I tried 60mm caps with a 56mm inner but they just fell straight through 😂
The car is due back from the body shop this week
Valiant-Ecosse said:
Looks lovely, although i suspect its too low to be optimum for handling. Have you had it cornerweighted etc?
Tyres wise I usually fit cup2 or direzzas but looking at trying the yokohama 52's as theres a good selection of sizes.
Thanks Alister, it has been corner weighted however, me being me I wanted it low. I would tend to agree it’s probably too low for ultimate performance. I want to raise it but I’d also rather run a 265 40 18 up the front rather than a 35 which will decrease the wheel arch gap too. Tyres wise I usually fit cup2 or direzzas but looking at trying the yokohama 52's as theres a good selection of sizes.
Edited by Valiant-Ecosse on Saturday 3rd July 13:32
I’m awaiting an NS2R in that size as at the moment they only make a 35 or 45
Edited by Robinreliantreggie on Tuesday 6th July 10:31
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff