Track Day alignment (EP3)

Track Day alignment (EP3)

Author
Discussion

agentsmith

Original Poster:

412 posts

192 months

Sunday 7th January 2018
quotequote all
hi all,

car going for alignment tomorrow. It's track only, so more aggressive at the risk of higher tyre wear is fine...

I was thinking something like:

Camb: -2.5 all round
Toe: Front -1 / Rear 0

Does this seem more or less okay? any advances for track use only?

thanks!


Edited by agentsmith on Sunday 7th January 17:50

krismccloy

256 posts

148 months

Tuesday 9th January 2018
quotequote all
Camber setting seem spot on, I run -2 degrees on the road & track with a little toe out, 0 rear toe and less camber than front.

I think your settings are a good starting point, I find playing with the rear settings are just as important as the front on these cars for a good turn and tackling understeer.