Fitting AC to a DC2 Integra

Fitting AC to a DC2 Integra

Author
Discussion

acme

Original Poster:

2,971 posts

198 months

Wednesday 29th April 2020
quotequote all
I know from factory AC was an option on the DC2 and one you could have fitted at a Honda dealer.

Has anyone had it fitted since, and if so could they advise on cost?

As the car was shipped without and it was added at the dealer I assume all the pipework is there even on those without, but the condenser/compressor/evaporator added.

Cheers in advance


LukeSi

5,753 posts

161 months

Wednesday 29th April 2020
quotequote all
I'd imagine there will be nothing ac related on the car and everything was added at the dealer. Not what you want to hear as it'll be a lot of parts to buy.

acme

Original Poster:

2,971 posts

198 months

Wednesday 29th April 2020
quotequote all
LukeSi said:
I'd imagine there will be nothing ac related on the car and everything was added at the dealer. Not what you want to hear as it'll be a lot of parts to buy.
No, you're right!

I'm fairly familiar with AC in another car and the issues etc on old cars. I know it cost £1k back in the day as a mate had one fitted when the car was a year old, was hoping with pipes etc there it's an easier job!

Cheers

chrismc1977

854 posts

112 months

Monday 4th May 2020
quotequote all
I removed the AC from mine. Unwanted weight in something meant to be so focussed.

Seemed an unnecessary option on a car in the UK imo- & mine didn’t work when I bought the car

acme

Original Poster:

2,971 posts

198 months

Monday 4th May 2020
quotequote all
Appreciate to some on an ITR AC would seem like heresy! But I always like AC on my cars where possible, especially on one with as much glass as an Integra.

I wonder how much the total AC components weigh on it, perhaps Honda did as per Lotus on their S2 Elise and made them super light, I seem to recall 18kg.

chrismc1977

854 posts

112 months

Monday 4th May 2020
quotequote all
Total weight is ~19kgs for all of it.

I’m at ~50kgs out of my UK car now whilst being sensible and retaining full interior and carpet- so weight is now very similar to a Clio 182

Helps to offset the meagre torque figure and it certainly feels all the more lively for it


acme

Original Poster:

2,971 posts

198 months

Monday 4th May 2020
quotequote all
chrismc1977 said:
Total weight is ~19kgs for all of it.

I’m at ~50kgs out of my UK car now whilst being sensible and retaining full interior and carpet- so weight is now very similar to a Clio 182

Helps to offset the meagre torque figure and it certainly feels all the more lively for it
Strewth, 19kg is superb! Well worth it in my eyes, but on a car as light that's almost 2%!

As a percentage that's huge, what else other than the AC have you taken out?

havoc

30,037 posts

235 months

Monday 4th May 2020
quotequote all
acme said:
Appreciate to some on an ITR AC would seem like heresy! But I always like AC on my cars where possible, especially on one with as much glass as an Integra.
yes

Had it on both of mine, but then they were daily drivers.

For the sake of 2% weight saving I'd want it left on for the convenience...especially where road-trips are concerned. Seen others tortured by European summer traffic jams because their chosen steed didn't have a/c...

chrismc1977

854 posts

112 months

Tuesday 5th May 2020
quotequote all
acme said:
Strewth, 19kg is superb! Well worth it in my eyes, but on a car as light that's almost 2%!

As a percentage that's huge, what else other than the AC have you taken out?
A/C fully removed- lines, compressor, evaporator etc 19kgs
JDM alloy torque mount in place of cast AC mount (in conjunction with AC removal) 2kgs
Passenger Airbag- 4kgs
Spare wheel & Jack- 14.5kgs
Wooden Boot false floor- 4kgs
Rear mats 0.5kg
Swapped to JDM rear brace/impact bar- hollow rather than solid in UK cars. 2kgs saved
Floorpan ‘bitumen‘ sound deadening stuff all removed - 5kgs
Bulkhead sound deadening -2kgs

Also has a lightened flywheel (-3kgs) full JDM OEM exhaust (manifold might be a touch lighter than the naff cast UK version) Not weighed though....

So that’s ~55kgs by my maths.

Still has a full interior & looks fully OEM. Probably a couple of other bits I can remove too.

It’s difficult to get a definitive weight figure for a UK car- most publications list 1100kgs- however 1130 is probably closer.

I’m confident it’s 1075ish now in which case
without compromising it for normal UK use.

Pretty decent considering a Civic EP3 Type R is ~1240

I’d love to get it accurately weighed one day...



Edited by chrismc1977 on Tuesday 5th May 09:35


Edited by chrismc1977 on Tuesday 5th May 09:37