Headlight Condensation

Headlight Condensation

Author
Discussion

jnsholland

Original Poster:

2 posts

80 months

Thursday 27th July 2017
quotequote all
Afternoon all, I'm sure this has been mentioned hundreds of times but I have the typical BMW front headlight condensation on the inside of the lens on my E63 M6 - Does anyone have some quick cheap fixes/ideas for this? Or is it best to get removing the bumper and taking apart the headlight to remove the old sealant and replace with new sealant?

balfron100

40 posts

86 months

Thursday 27th July 2017
quotequote all
The lamp is not serviceable as its a sealed unit, don't think the front lens can be removed so its gubbed.

E-bmw

9,106 posts

151 months

Friday 28th July 2017
quotequote all
If that is the case, all you can do is to try to find where it is getting in & seal it, and then remove all lamp fittings & leave a hair dryer blowing through it for a while to get rid of it.

Thermobaric

725 posts

119 months

Friday 28th July 2017
quotequote all
There's always trying to take it apart with a heat gun/baking it. A bit nerve racking though.