CS boot spoiler for M2C - UK source
Discussion
I've not dealt with them for a while, but http://www.bmminiparts.com/ used to be good at sourcing all sorts of part. Although their core business is taking overstock parts off dealer hands, they can source brand new too.
Pupp said:
Now sourced; big thanks to IND in Illinois for very swift and easy supply. Turned up in 5 days very robustly parcelled… just sat atop the original lip in the second pic, hence a bit high off the surface.
Heat gun and fishing line at the ready…
Blisters on both thumbs can be painful I’ve done it 4 times now
Pupp said:
Hmmm… only planning on doing it once and I have 2 thumbs (but 1 paint job)
Worth pointing out the Mperformance carbon spoilers never fit correctly at either ends, the main reason why removed and re did it and when I removed it off my og m2 to fit on my comp I was in two minds about using the beta link but ended up just using 3m tape (again!) it started lifting at the ends again!! So I took it off and used a combo of 3m tape and tiger seal through the middle with the intention of not removing it when I sell.
Pretty sure the Mperformance ones don’t come with 3m tape now, they have to be glued on with beta link.
Okay, took advantage of the heat today naturally softening the glue and the original lip is off. Tape/glue residue gone too… WD40 soak and a thumbnail soon lifted it; not as bad as I was expecting.
The CS gurney sits very close indeed on the boot lid, really can’t see there should be any issues getting it to hug when fitting. Will pop it on tomorrow.
The CS gurney sits very close indeed on the boot lid, really can’t see there should be any issues getting it to hug when fitting. Will pop it on tomorrow.
Gassing Station | M Power | Top of Page | What's New | My Stuff