280 285 x25.4mm

[jason61c]

Looking for some 280-290mm discs 25.4 ish thick.

Any options apart from AP? They're for bells.

Regards

[turbotoaster]

lotus elise are 282mm and 25.4mm thick, you could machine them for ali bells

i used saab 308mm pagid discs as they are 25.4mm and again machined the centres for ali bells

[stevieturbo]

Wilwood do cheaper options....but whether they have the correct bolt PCD to suit your bells is another matter.

What discs are you currently using ? Or are you building a new setup ?

Reyland and a few other places are machining some OEM discs to accept bells, so could do whatever size/PCD etc you need.

http://www.reyland.co.uk/discs/

[jason61c]

turbotoaster said:

lotus elise are 282mm and 25.4mm thick, you could machine them for ali bells

i used saab 308mm pagid discs as they are 25.4mm and again machined the centres for ali bells

Hi

Thanks, I'm needing a height/total offset 47-50mm.

When you say machined the centres, what exactly do you mean? Just taking a standard disc(saab) and re drilling etc?

[jason61c]

stevieturbo said:

Wilwood do cheaper options....but whether they have the correct bolt PCD to suit your bells is another matter.

What discs are you currently using ? Or are you building a new setup ?

Reyland and a few other places are machining some OEM discs to accept bells, so could do whatever size/PCD etc you need.

http://www.reyland.co.uk/discs/

Its a new setup, based around ap cp5040 calipers, to fit under a 14inch wheel.

[turbotoaster]

jason61c said:

Hi

Thanks, I'm needing a height/total offset 47-50mm.

When you say machined the centres, what exactly do you mean? Just taking a standard disc(saab) and re drilling etc?

taking a standard disc and machining all of the centre away then use an aluminum bell to bolt to them, basically same as what steve mentioned about what reyland do