What Rims Have i Got Please?

[Tonymg]

Hello as above

what rims have I got the name and what size Rubber do I put on them please I have 18s on my Tuscan but the Roads around Oxford are so bad...

I need smaller wheels but don't want to put 16s on?
iv had these for years and totally forgot about them...just found them the other day.

[stlol]

RL7 Normally fitted to Cerberas, 245 40 17 I think??

[Tonymg]

Thanks for the feed back but are the front tyres smaller then the back one? size wise?

[stlol]

This is for cerbs, think you would be ok with the same f&r on a Tuscan.
https://www.pistonheads.com/gassing/topic.asp?t=12...

[Tonymg]

stlol once again thank you will post photos when its all done...

Tony...

[Byker28i]

If 17" RL7's then on a cerbera you run 225/40 on the front, 245/40 on the rear (at least I do with Eagle F1's)

[Let off some steam Bennett]

stlol said:

RL7 Normally fitted to Cerberas, 245 40 17 I think??

You bored lying on that beach Steve, you cant keep away

[stlol]

Let off some steam Bennett said:

You bored lying on that beach Steve, you cant keep away

There's only so much ass you can look at before getting bored lol.....

[Tonymg]

I have been told because the rims are all the same size to put 225/45/17s all round?

[S6 ROR]

Sorry to high jack the thread, but just looked at your profile Tonymg, where did you get them lamp stands from in your profile picture? Or do you make them, they are awesome

[Let off some steam Bennett]

stlol said:

There's only so much ass you can look at before getting bored lol.....

Ha

[Squirrelofwoe]

OT but where abouts in Oxford are you based Tony?

And more importantly, what colour is your Tuscan- I'll keep an eye out for it!

[Byker28i]

Tonymg said:

I have been told because the rims are all the same size to put 225/45/17s all round?

Hum not sure - what about fouling on the arch. Why are they all the same size? Cerberas definitely have smaller on the front.

[phazed 11.83]

I run these same rims on my Chim.

Front 235/40/17, Rear 255/40/17

]

Edited by phazed 11.83 on Sunday 28th May 10:55

[MikeE]

stlol said:

RL7 Normally fitted to Cerberas, 245 40 17 I think??

The 16" versions of these were standard on the Tuscan when launched in early 2000 and the 18" were an option, I had the 18" option on my first Tuscan

[robsco]

MikeE said:

stlol said:

RL7 Normally fitted to Cerberas, 245 40 17 I think??

The 16" versions of these were standard on the Tuscan when launched in early 2000 and the 18" were an option, I had the 18" option on my first Tuscan

Hen's teeth now, 18 inch RL7s! Always admired that Tuscan each time you post the photo.

[Tonymg]

Thanks Chaps Keep the info and pics Coming...

[XK120FHC]

My Cerbera with hens teeth for wheels, 18" RL7s.

[phazed 11.83]

I am still looking for a pair of 18 inch RL7's if anyone knows of a pair going spare?

[MikeE]

robsco said:

MikeE said:

stlol said:

RL7 Normally fitted to Cerberas, 245 40 17 I think??

The 16" versions of these were standard on the Tuscan when launched in early 2000 and the 18" were an option, I had the 18" option on my first Tuscan

Hen's teeth now, 18 inch RL7s! Always admired that Tuscan each time you post the photo.

Loved that car when I got it in March 2000 but it was built so badly after 6 painful months I sent it back to Peter Wheeler and demanded they build me another one!

TVR took it back and refurbished it including changing the wheels for spiders and then my dealer resold it to an unsuspecting customer.

Found out a couple of years ago that it had an engine fire and was written off and broken up for spares