Looking to have dash installed
Discussion
I have Chim I need someone to fit top bottom dash near Portsmouth, I am coming from France would need it done in a a day, ferry arrives 8.15 in the morning goes back 7.15 pm at night, I can’t get it fitted in France I really need some help please I will provide panel I need price to fit
I am not the best diy person in this section but have changed the dash on a couple of cars. The bottom panel is particularly tricky with the clips around the head unit but I would have a go at changing it myself before travelling that far to have the job done.
There are two small brackets that I used araldite to hold in place. Make sure they are properly cleaned and scuffed up to get the adhesion.
Happy to send you some picture if you want to have a go?
There are two small brackets that I used araldite to hold in place. Make sure they are properly cleaned and scuffed up to get the adhesion.
Happy to send you some picture if you want to have a go?
I did this last year, quite an enjoyable job. Not so hard if you take your time.
Where about are you based out of interest? My in-laws are in Brittany and we'll be taking mine over a couple of times later in the year. There's some great empty roads almost just the sort of place the Chimimaera was designed to be driven.
Where about are you based out of interest? My in-laws are in Brittany and we'll be taking mine over a couple of times later in the year. There's some great empty roads almost just the sort of place the Chimimaera was designed to be driven.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff