Help any one recognise these fixings for a bathroom cabinet
Discussion
Just done a schoolboy error and thrown away the packing for a bathroom cabinet I was fitting at my sons along with the brackets that hold the glass internal shelves.
they fit into holes in the rear of the cabinet.
Hopefully someone will know what they are called or even better where I can get some.
unfortunately no name on the cabinet and they are no longer available on amazon where i bought it from, should have fitted it sooner!
Ive asked some one on amazon selling what looks like the same cabinet but they cant supply just the brackets.
Any help accepted.
sorry pics are sideways
Just cylindrical shelf pins aren't they? Measure the diameter of the holes, it's probably 5mm or 6mm and then go on amazon for shelf pins. Loads on there, simple cylindrical or ones with one side flattened.
Glass shelves often use pins with a rubber coating on the shelf side but it's not essential.
https://www.amazon.co.uk/GLASS-SHELF-SUPPORTS-PLUG...
Glass shelves often use pins with a rubber coating on the shelf side but it's not essential.
https://www.amazon.co.uk/GLASS-SHELF-SUPPORTS-PLUG...
They look like ours:
Which at least might give you an idea of the shape of the bracket. Our cabinet was a Chinese brand called Quavikey from Amazon, but I suspect they use generic parts. They hold a glass shelf top and bottom and as you say, cantilever off a pin and the body of the support in the track to the rear of the cabinet. HTH.
Which at least might give you an idea of the shape of the bracket. Our cabinet was a Chinese brand called Quavikey from Amazon, but I suspect they use generic parts. They hold a glass shelf top and bottom and as you say, cantilever off a pin and the body of the support in the track to the rear of the cabinet. HTH.
Mark Benson said:
They look like ours:
Which at least might give you an idea of the shape of the bracket. Our cabinet was a Chinese brand called Quavikey from Amazon, but I suspect they use generic parts. They hold a glass shelf top and bottom and as you say, cantilever off a pin and the body of the support in the track to the rear of the cabinet. HTH.
That's the ones .Which at least might give you an idea of the shape of the bracket. Our cabinet was a Chinese brand called Quavikey from Amazon, but I suspect they use generic parts. They hold a glass shelf top and bottom and as you say, cantilever off a pin and the body of the support in the track to the rear of the cabinet. HTH.
Anyone know where I can get some?
Cheers
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff