Repaint Bumper after Deformation?

Repaint Bumper after Deformation?

Author
Discussion

Shedding

Original Poster:

609 posts

250 months

Friday 24th March 2023
quotequote all
Someone has reversed into my car and scratched the front bumper. The bumper must have deformed and then sprung back into place as there are also cracks in the paint perpendicular to the scratches. If this bumper is repainted, will the past stressing of the plastic bumper affect the new paint either immediately or over time? Also, will a paint shop be able to match the metallic black of the car (factory paint) without having to blend into adjacent panels?

I'm wondering if I'm better just disguising the damage with black wax and waiting for another bumper to appear on Ebay or the like.

Thanks for any help.

sociopath

3,433 posts

66 months

Friday 24th March 2023
quotequote all
How deep are the horizontal scratches? A lot of that might buff out and you then decide it's not worth worrying about

Shedding

Original Poster:

609 posts

250 months

Friday 24th March 2023
quotequote all
They're quite deep, they won't buff out, I've tried.

Panamax

3,973 posts

34 months

Friday 24th March 2023
quotequote all
Shedding said:
better just disguising the damage with black wax and waiting for another bumper to appear on Ebay or the like.
That's what I do in these situations. Too much risk of getting a proper £1,000 repair and then the same thing happens again.

Shedding

Original Poster:

609 posts

250 months

Friday 24th March 2023
quotequote all
The car is pristine otherwise and I haven't yet found a suitable used bumper so I am keen to investigate getting this one painted but only if the stress lines won't affect the new paint and blending into other panels is not required.

somouk

1,425 posts

198 months

Friday 24th March 2023
quotequote all
When my bumper had been bumped they just heated it up to pop the crease out then filled and painted as normal. Likely with a flat back in the middle.

paintman

7,675 posts

190 months

Friday 24th March 2023
quotequote all
Shedding said:
Someone has reversed into my car and scratched the front bumper. The bumper must have deformed and then sprung back into place as there are also cracks in the paint perpendicular to the scratches.
You can't paint over cracks.
The cracks will need sanding completely out, so needs to go back to the bare plastic & starting from there.

Shedding said:
If this bumper is repainted, will the past stressing of the plastic bumper affect the new paint either immediately or over time?
It shouldn't. Assuming the plastic itself isn't cracked.


Shedding said:
Also, will a paint shop be able to match the metallic black of the car (factory paint) without having to blend into adjacent panels?
They should be able to.

trashbat

6,006 posts

153 months

Friday 24th March 2023
quotequote all
Shedding said:
They're quite deep, they won't buff out, I've tried.
Tried with what? By hand, or machine?

Shedding

Original Poster:

609 posts

250 months

Friday 24th March 2023
quotequote all
paintman said:
Shedding said:
Someone has reversed into my car and scratched the front bumper. The bumper must have deformed and then sprung back into place as there are also cracks in the paint perpendicular to the scratches.
You can't paint over cracks.
The cracks will need sanding completely out, so needs to go back to the bare plastic & starting from there.

Shedding said:
If this bumper is repainted, will the past stressing of the plastic bumper affect the new paint either immediately or over time?
It shouldn't. Assuming the plastic itself isn't cracked.


Shedding said:
Also, will a paint shop be able to match the metallic black of the car (factory paint) without having to blend into adjacent panels?
They should be able to.
Thanks, that's really helpful, I'll contact a local paint-shop.


Edited by Shedding on Saturday 25th March 06:37

Shedding

Original Poster:

609 posts

250 months

Friday 24th March 2023
quotequote all
trashbat said:
Shedding said:
They're quite deep, they won't buff out, I've tried.
Tried with what? By hand, or machine?
By hand with some medium polish. It didn't make the any difference. I think the scratches are through the clear-coat and into the black coat, possibly through that in places.

trashbat

6,006 posts

153 months

Saturday 25th March 2023
quotequote all
Shedding said:
By hand with some medium polish. It didn't make the any difference. I think the scratches are through the clear-coat and into the black coat, possibly through that in places.
Whilst you're probably right, I think use of a dual action polisher would make that look significantly better.