Silent Bathroom Light Pull Cord

Silent Bathroom Light Pull Cord

Author
Discussion

DuncB7

Original Poster:

353 posts

98 months

Thursday 18th April 2019
quotequote all
Can anyone recommend a silent bathroom light pull cord switch? Lighting installed is LED and not compatible with dimming. My search so far has failed to yield a suitable product.

Whilst there is a certain comfort in having an early hours sit down pish, it would be preferable to have lighting available without creating a click that can wake an entire house.

RDBx

346 posts

204 months

Thursday 18th April 2019
quotequote all
How about a battery powered light switch that links to a mains partner which does the actual switching?

www.retrotouch.co.uk/crystal-touch-light-switches....

The battery powered one works of 9v so can go anywhere, also is illuminated for nighttime convenience. I've used them in my last two bathrooms.

sparkythecat

7,902 posts

255 months

Thursday 18th April 2019
quotequote all
Install a PIR?

snake_oil

2,039 posts

75 months

Thursday 18th April 2019
quotequote all
DuncB7 said:
it would be preferable to have lighting available without creating a click that can wake an entire house.
Pfffft. Mine wakes the end of the street.

dave7108

188 posts

154 months

Thursday 18th April 2019
quotequote all
I had a silent one been there years, it broke, replaced it. New one wakes the entire house up. I replaced it with a PIR.

Equus

16,852 posts

101 months

Thursday 18th April 2019
quotequote all
Alternatively, you can now get touch-sensitive, waterproof light switches that are wall mounted.

MJNewton

1,733 posts

89 months

Thursday 18th April 2019
quotequote all
Might something like this work? It's a dimable version which, presumably, doesn't work with a mechanical mechanism hence no/low(er) noise. Added bonus is that as it dims it could be beneficial for nighttime use, although do make sure your lamp is dimmable (and doesn't sit in parallel with a fan which might need a bit more though if so).

Personally I'd look to replace it with a conventional switch outside the bathroom - is that an option for you?

dmsims

6,512 posts

267 months

Herbs

4,916 posts

229 months

Thursday 18th April 2019
quotequote all
Another vote for PIR - best thing I ever did at the last house.

devnull

3,752 posts

157 months

Thursday 18th April 2019
quotequote all
I use one of those LED edged mirrors which I can just wave my hand at and it lights.

DuncB7

Original Poster:

353 posts

98 months

Thursday 18th April 2019
quotequote all
Thanks for all the responses. It has rather opened my eyes to alternatives.

PIR is the obvious solution but would prefer to control ourselves. It's nice to have the option of light during the night but similarly it's nice to have the option of dark.

There isn't anywhere within a reasonable distance to install a switch outside of the bathroom. The surroundings are difficult to explain in text.

Perhaps a remote controlled switch on the ceiling, does such a product exist? I note another contributor suggests a 'mains switcher' combined with a battery touch switch. Could do without the battery touch pad for the reason above but the switch concept would be good with perhaps a small mobile remote controller.

Herbs

4,916 posts

229 months

Thursday 18th April 2019
quotequote all
DuncB7 said:
Thanks for all the responses. It has rather opened my eyes to alternatives.

PIR is the obvious solution but would prefer to control ourselves. It's nice to have the option of light during the night but similarly it's nice to have the option of dark.

There isn't anywhere within a reasonable distance to install a switch outside of the bathroom. The surroundings are difficult to explain in text.

Perhaps a remote controlled switch on the ceiling, does such a product exist? I note another contributor suggests a 'mains switcher' combined with a battery touch switch. Could do without the battery touch pad for the reason above but the switch concept would be good with perhaps a small mobile remote controller.
You still have a switch somewhere but the PIR is further down the line. So if it is off at the switch then it is off full stop, if the switch is on then the PIR controls whether the light is on or not.

jfire

5,891 posts

72 months

Thursday 18th April 2019
quotequote all
Weird how crap this technology is, along with extractors that were recycled from jet engines.

Flat is 12 years old TBF and was fitted with all the worst parts.

LemonParty

591 posts

236 months

Thursday 18th April 2019
quotequote all
TLC Direct do a Quinetic switch, which can mount anywhere, has no battery, and works a remote switch - not cheap, but probably does everything you want it to

https://www.tlc-direct.co.uk/Main_Index/Wiring_Acc...

DuncB7

Original Poster:

353 posts

98 months

Thursday 18th April 2019
quotequote all
LemonParty said:
TLC Direct do a Quinetic switch, which can mount anywhere, has no battery, and works a remote switch - not cheap, but probably does everything you want it to

https://www.tlc-direct.co.uk/Main_Index/Wiring_Acc...
Excellent, this looks like a great solution.

JuniorD

8,624 posts

223 months

Thursday 18th April 2019
quotequote all
For a night time nija-style bathroom visit a self respecting PHer would simply reach for their bedside Maglite

DuncB7

Original Poster:

353 posts

98 months

Thursday 18th April 2019
quotequote all
Knowledgeable bunch you lot.

No earth on the diagram. Assuming the fuse removes requirement for earth?


MJNewton

1,733 posts

89 months

Thursday 18th April 2019
quotequote all
Fuses protect against overload. The lack of an Earth connection is a result of it being double insulated - designed and manufactured in a way that a live wire is unable to electrify the enclosure. Your light/fan/whatever will still likely need one - just pass the existing Earth connection through to it (ie. it is not routed via the receiver).

DuncB7

Original Poster:

353 posts

98 months

Thursday 18th April 2019
quotequote all
MJNewton said:
Fuses protect against overload. The lack of an Earth connection is a result of it being double insulated - designed and manufactured in a way that a live wire is unable to electrify the enclosure. Your light/fan/whatever will still likely need one - just pass the existing Earth connection through to it (ie. it is not routed via the receiver).
Many thanks. Seems so bloody obvious when pointed out. I guess that's how one learns.

Sheepshanks

32,724 posts

119 months

Thursday 18th April 2019
quotequote all
DuncB7 said:
LemonParty said:
TLC Direct do a Quinetic switch, which can mount anywhere, has no battery, and works a remote switch - not cheap, but probably does everything you want it to

https://www.tlc-direct.co.uk/Main_Index/Wiring_Acc...
Excellent, this looks like a great solution.
Those switches still click though - that's how they generate their power.