Ignition Amp Wiring Routing
Discussion
Hi Guys,
On my 93 Pre-serp the wiring has been messed about with a lot, one that's a real mess is the White/black wire going from the ignition amp to the ECU. The bare single wire is snaked around under the throttle body and then taped up all the way to the AFM where it is wired into the resistor and then back down the loom, via a few spade connectors and a dodgy tape job.
I want to tidy it up but am not sure what the factory routing is from the amp to the ECU, can any body help?
Thanks in advance.
On my 93 Pre-serp the wiring has been messed about with a lot, one that's a real mess is the White/black wire going from the ignition amp to the ECU. The bare single wire is snaked around under the throttle body and then taped up all the way to the AFM where it is wired into the resistor and then back down the loom, via a few spade connectors and a dodgy tape job.
I want to tidy it up but am not sure what the factory routing is from the amp to the ECU, can any body help?
Thanks in advance.
Gassing Station | Chimaera | Top of Page | What's New | My Stuff