RE: Porsche 911 Gets LS1 V8 Transplant
Discussion
boxsey said:
I can see why some prefer the American V8 rumble, especially when compared to the muted sound of a 911 turbo but I'll take the howl of a n/a flat six over both every time. Especially when it's an RSR variant
I believe it was a 996 Turbo which kind of rules out the "n/a flat six howl" Know it’s a bit simplistic but lets do some maths here !!!
A 50k miles 2002 Corvette C5 LS1 Engine, 6 Speed Transmission and Loom from Pick-A-Part Cleveland, Ohio for £2,440 plus £500 for shipping, duty, VAT etc. + £60 fee to shipping company on collection from Dartford
TOTAL Cost £3,000
OR
A “Hardly” Used 966 Turbo Engine (photo) from http://www.racecarsdirect.com/listing/37352/porsch... from Budapest, Hungary for 15,000 Euro (£13,480) + 10k miles Porsche G96-50 Turbo Gearbox from http://www.race-cars.com/boxsales/other/1233022778... from Cutler Bay, Florida for $8,500 (£5,300) + shipping, duty, VAT etc. (let’s be generous and say just £1,220 )
TOTAL Cost £20,000
To be fitted into an Engine Fire damaged Porsche 996 Turbo
What’s it to be ????
A 50k miles 2002 Corvette C5 LS1 Engine, 6 Speed Transmission and Loom from Pick-A-Part Cleveland, Ohio for £2,440 plus £500 for shipping, duty, VAT etc. + £60 fee to shipping company on collection from Dartford
TOTAL Cost £3,000
OR
A “Hardly” Used 966 Turbo Engine (photo) from http://www.racecarsdirect.com/listing/37352/porsch... from Budapest, Hungary for 15,000 Euro (£13,480) + 10k miles Porsche G96-50 Turbo Gearbox from http://www.race-cars.com/boxsales/other/1233022778... from Cutler Bay, Florida for $8,500 (£5,300) + shipping, duty, VAT etc. (let’s be generous and say just £1,220 )
TOTAL Cost £20,000
To be fitted into an Engine Fire damaged Porsche 996 Turbo
What’s it to be ????
Fireblade69 said:
I love it when people do this kind of stuff if the car was pretty much dead, (and I love the 911), then bully for him.
Anyone got a Noble M12 GTO3 engine I can have for my Mondeo estate?
You can get a turbo kit for the 3.0ltrs from the US. its a single turbo and some run upto about 400bhp. after that you would need to get a built bottom end (forged rods and pistons) to take much more power. The noble guys have problems with the 5speed gear boxes at much iover 400lbsft of torque. 6 speed sare much stronger but still need atention if you are pushing higher power. Anyone got a Noble M12 GTO3 engine I can have for my Mondeo estate?
Chris.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff