Show us your steelies
Discussion
eldoncino said:
oponeo.co.uk They are multipla fitment I believe, same size as original alloys (6x15) however offset is 5mm more (31.5mm) so they stick out 5mm less than alloys. Part number is Alcar KFZ 7835.
They phone you up and tell you that they won't fit your car to cover their arses but they do fit, no rubbing etc.
Thanks, I'll take a look. Are you running standard 195/45 tyres or 195/50? They phone you up and tell you that they won't fit your car to cover their arses but they do fit, no rubbing etc.
dantournay said:
Riley Blue said:
There's loads on Ebay that look like that but all are described as 'steel' - are they a direct bolt-on for your Morris? If so, they should fit my Riley as the PCD is the same.
No, mine has 4 stud 109pcd Ford hubs. This allows me to also fit some 4 stud Citroen, Peugeot, Saab, Alfa, Audi and Porsche rims on a close to 0ET. My 15x6 rims are 18ET, alloy and weigh 4.76kg. Tread carefully as there aren't many options for the minor with standard 4" (101.6) PCD and you really don't want to fit 100mm with "wobbly" bolts. In the Minor world Marina upgrades were common (less so now) and some of these (vans were different) are the same PCD as MGF.
epam said:
eldoncino said:
oponeo.co.uk They are multipla fitment I believe, same size as original alloys (6x15) however offset is 5mm more (31.5mm) so they stick out 5mm less than alloys. Part number is Alcar KFZ 7835.
They phone you up and tell you that they won't fit your car to cover their arses but they do fit, no rubbing etc.
Thanks, I'll take a look. Are you running standard 195/45 tyres or 195/50? They phone you up and tell you that they won't fit your car to cover their arses but they do fit, no rubbing etc.
GT6 Jonsey said:
Faust66 said:
Love this!
Sadly I'm too damn tall to fit in one.
I'm a relatively lanky fella at 6ft4 and still manage to fit in the GT fairly easily. Have you tried one on for size ?Sadly I'm too damn tall to fit in one.
Tried a mate's Triumph Spitfire with slightly comical results, so I assumed a GT was of a similar size inside.
I'll definitely have to give one a go and see how I get on. Always thought they are excellent cars... and damn good looking into the bargain.
Thanks for the advice.
Used to have a set of "G60" (that design isn't actually the "G60" style, as the G60 ones had round holes, these are Passat B4 winters) on my b3 Passat, sold them for a decent wedge as they were a rare set of 5x100 fitment then bought a set of Corrado VR6 alloys for half the price yay for scene tax!
Welshman Adam said:
I'm looking for a set for my Focus Mk2 - there are loads of alloy sellers around, but where do you go for steels??
Fed up of the corrosion on my Ghia alloys, renowned for white worm...
Try the scrappies, no? They must be full of MK2 Focuses (Is that the plural for Focus )Fed up of the corrosion on my Ghia alloys, renowned for white worm...
Gassing Station | General Gassing | Top of Page | What's New | My Stuff