Question, Why did you join the UK VOA?

[fatboy18]

Just wondering why many of you out there chose to join the UK VOA?

Was it just for a magazine?

[fatboy18]

8.4L 154 said:

I left, it cost too much for 4 issues

So the added events and social did not appeal?

[Dr-Bob]

Been a member since 2001 both VCA and VOA since the beginning...

[Viper10]

I’m in the club cos I don’t know enough about Vipers.
On that note can anyone help???
I want to replace my upper and lower A arm bushes, front and rear. Plus the sway bar inner and outer bushes, all with polyurethane. It’s a Gen 3, the car gets ragged around on track days and the bushes are beginning to show their age… 10 years. I’ve tried Mr Google and drawn a blank on both sides of the pond. I’d like to buy off the shelf rather than strip the suspension down and wait for custom made components.
Any ideas?

[Ginja]

Not very helpful I know, but I vaguely recall a conversation on either the voa or vca sites regarding a member in the club having some poly bushes made up for his car and arranging a group buy at the same time. The point being that at the time (few years back now) there were no commercially available poly bushes for our cars.

I will admit that I'm not up to date on the latest after market parts but a check with jonb at Viper parts rack or Dan lesser at viper specialty performance should tell you what you need to know.

[Dr-Bob]

And here we have the answer........


http://www.roeracing.com/productcart/pc/Polyuretha...

[fatboy18]

No you don't because richard is asking about a Gen 3

[Viper10]

Well spotted Mark.
Top marks for effort Baz, but you lose a few points for not reading the question properly. Thanks anyway.

Mark,
Thanks for the email, I've followed up your leads and think I might have found a supplier for the A arms and shock mounts.

[Dr-Bob]

OOOPS Missed that bit,,,,