Front number plate deleters - are you one?
Discussion
InitialDave said:
How did we go from people not fitting number plates to cars that clearly have a mounting point for them to nonsense about the precise standards for plate manufacture and Your Mum arguments?
I dunno. What's rather amusing for one of the posters calling cars "chav" and quoting chapter and verse about number plate regs has a build thread showing an illegally modified VW...
(Notched chassis rails to get the lowz, which is an instant qualifier for IVA under the Radically Modified Vehicles rules...)
yonex said:
Kuji said:
And Yonex wonders why people think he is a moron.
I'd suggest you save your hankies for av, after recenty coming out he'll need all the hugs he can get Edited by Kuji on Thursday 12th September 20:28
What do you drive btw, do you also have a non standard plate?
You and the others seem overly friendly. You obviously share a few too many ,secrets.. ;D
Got to love the way Yonex and a few others in the minority believe anything 'non standard' must therefore unequivocably be illegal.
In their distinctly grey and boring world presumably any car colours other than black grey or silver must also therefore be illegal.
I believe Phillistines is the appropriate description.
You truly couldn't make it up.
In their distinctly grey and boring world presumably any car colours other than black grey or silver must also therefore be illegal.
I believe Phillistines is the appropriate description.
You truly couldn't make it up.
av185 said:
Got to love the way Yonex and a few others in the minority believe anything 'non standard' must therefore unequivocably be illegal.
In their distinctly grey and boring world presumably any car colours other than black grey or silver must also therefore be illegal.
I believe Phillistines is the appropriate description.
You truly couldn't make it up.
Agreed, you couldn't. One of the most arrogant bell ends on the forum, so happy to roll out insult after insult over number plates, his general wealth, in fact, most everything, gets found out for not having a number plate adhering to his oh so high standards. In their distinctly grey and boring world presumably any car colours other than black grey or silver must also therefore be illegal.
I believe Phillistines is the appropriate description.
You truly couldn't make it up.
Hypocrite. As I said all along.
Money never did buy class sweetie
InitialDave said:
Taylor James said:
I didn't say you were.
I asked:
1. What exactly does that achieve?
2. What's going to change?
I don't understand the question.I asked:
1. What exactly does that achieve?
2. What's going to change?
The post you replied to wasn't intended to achieve or change anything, why would it?
Taylor James said:
I see what you mean. The poster seemed to be pointlessly wasting a lot of time forming negative judgments and having negative thoughts about things he couldn't affect in any way. I was questioning whether he had thought about that. I should probably have just said "stop wasting your time".
That's a fair point, but the thread's about people without front plates, and that's my opinion on them thanks to the type of car/driver I've come to associate it with.If it were all beautiful sports/supercars being driven responsibly, I'd probably not have not such a negative opinion.
But knobheadery is what I see, so knobheadery is what I think.
As for time wasting, well, I think the last couple of pages of the thread shows I'm maybe not that bad.
InitialDave said:
If it were all beautiful sports/supercars being driven responsibly, I'd probably not have not such a negative opinion.
But knobheadery is what I see, so knobheadery is what I think.
I agree with this. In my experience most cars without front plates are being driven badly by knobs...But knobheadery is what I see, so knobheadery is what I think.
Sway said:
InitialDave said:
How did we go from people not fitting number plates to cars that clearly have a mounting point for them to nonsense about the precise standards for plate manufacture and Your Mum arguments?
I dunno. What's rather amusing for one of the posters calling cars "chav" and quoting chapter and verse about number plate regs has a build thread showing an illegally modified VW...
(Notched chassis rails to get the lowz, which is an instant qualifier for IVA under the Radically Modified Vehicles rules...)
Mandalore has a problem with me. So he gets my bad jokes.
Av spent some 10 pages calling everyone and anything a chav and being generally vile.
Now it turns out he also has an illegal number plate which is quite funny :-)
Not sure what you care for a car I haven't owned for 5 years , though. I never claim for everything to be legal. Infact I quite regularly do illegal things.
av185 said:
anonymous said:
[redacted]
No st. For a moron, you seem to know an awful lot about my plate.
Especially considering I haven't even posted a full picture of it.
And yet you know for a fact it is illegal.
Have you considered a career in the Police?
So what's the number then Sherlock?
Go take a photo of this on your stick on plates (front one specifically) and if it has the bsau mark and postcode , I'll stick 10 quid to the air ambulance with proof , and post up a photo of my plates in return.
If you don't, you put 10 quid in air ambulance
How about that.
I make number plates every single day. I have never seen a stick on plate that complies to the British standard.
There are so many points that a plate has to pass on before it can display the BSAU145D mark and therefore be a legal plate.
Retroreflection test, colourimetric test, resistance to bending, impact, solvents, corrosion, weathering, thermal resistance and the effect of dirt test.
It really isn’t just a question of the plate being the right size - I would be absolutely amazed if that stick on plate was actually technically legal regardless of who supplied it. In fact I would be interested to learn what make it is so that I can contact them and see about offering them for sale in my shop!
There are so many points that a plate has to pass on before it can display the BSAU145D mark and therefore be a legal plate.
Retroreflection test, colourimetric test, resistance to bending, impact, solvents, corrosion, weathering, thermal resistance and the effect of dirt test.
It really isn’t just a question of the plate being the right size - I would be absolutely amazed if that stick on plate was actually technically legal regardless of who supplied it. In fact I would be interested to learn what make it is so that I can contact them and see about offering them for sale in my shop!
xjay1337 said:
Av spent some 10 pages calling everyone and anything a chav and being generally vile.
Now it turns out he also has an illegal number plate which is quite funny :-)
.
Yep I agree it would be funny if not hilarious but only if it was true. Now it turns out he also has an illegal number plate which is quite funny :-)
.
Are you still preparing for custard?
av185 said:
xjay1337 said:
Av spent some 10 pages calling everyone and anything a chav and being generally vile.
Now it turns out he also has an illegal number plate which is quite funny :-)
.
Yep I agree it would be funny if not hilarious but only if it was true. Now it turns out he also has an illegal number plate which is quite funny :-)
.
Are you still preparing for custard?
No bsau mark . No post code. Illegal chavplate for a chav
Julian Thompson said:
I make number plates every single day. I have never seen a stick on plate that complies to the British standard.
There are so many points that a plate has to pass on before it can display the BSAU145D mark and therefore be a legal plate.
Retroreflection test, colourimetric test, resistance to bending, impact, solvents, corrosion, weathering, thermal resistance and the effect of dirt test.
It really isn’t just a question of the plate being the right size - I would be absolutely amazed if that stick on plate was actually technically legal regardless of who supplied it. In fact I would be interested to learn what make it is so that I can contact them and see about offering them for sale in my shop!
You know, I don't see why they couldn't comply? After all, the reflective bit of the plate is a thin plastic film on the rear side of the clear plastic part of the laminate that makes up a plate, yes?There are so many points that a plate has to pass on before it can display the BSAU145D mark and therefore be a legal plate.
Retroreflection test, colourimetric test, resistance to bending, impact, solvents, corrosion, weathering, thermal resistance and the effect of dirt test.
It really isn’t just a question of the plate being the right size - I would be absolutely amazed if that stick on plate was actually technically legal regardless of who supplied it. In fact I would be interested to learn what make it is so that I can contact them and see about offering them for sale in my shop!
So a similar thing with a very thin, flexible clear front over it should be able to do the job while still conforming to the bodywork.
Not that fussed myself. If it looks like a plate and it's legible/not massively fked about with for spacing etc, whether it meets the precise letter of the law doesn't strike me as making much odds in real terms.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff