Internal sill trim removal Skoda Yeti?

Internal sill trim removal Skoda Yeti?

Author
Discussion

Easternlight

Original Poster:

3,424 posts

143 months

Sunday 30th April 2017
quotequote all
I'm fitting a tow bar to my Yeti, and need to run the wiring from the front to back, the Witter instructions show how to remove all the trims except the ones across the door sills inside.
I can't find any screws so they must just be on clips, I've had a good pull at them but no luck and I'm worried that I may break them if pulling the wrong way.
Any one been there /done this?

SteBrown91

2,360 posts

128 months

Sunday 30th April 2017
quotequote all
I don't know about he yeti specifically but often on 5 doors the sill trim is fitted under the b pillar trim (and seatbelt mech) so it's likely you would have to undo the seatbelt anchor and remove the b pillar trim first

Who me ?

7,455 posts

211 months

Sunday 30th April 2017
quotequote all
IF you can get to both ends-why bother ,if there's room for a "fishwire" to pull the cables through . Or is there enough room to push the cables up from the floor side?

Alternatively- ask on here
https://www.briskoda.net/forums/forum/170-skoda-ye...
there might even be a "how to " written by an owner, or one of the well qualified Techs might advise.



Edited by Who me ? on Sunday 30th April 13:00