Boot lacquer peeling - options?
Discussion
Hard to see if the base/colour coat has lifted as well?
Had experience of a small area of lacquer lifting (say, 150mm x 80mm) following removal of decals from the 'panel' between the rear lights on my Tuscan. A mate reckoned he could sort it.
We flattened the area off using 1200 wet & dry then misted on several coats of 'rattle-can' lacquer. Used mates electric polishing mop, and after several applications of G3 compound it came up fine.
Worst case, if you try a diy approach and it doesn't come good/you're unhappy, you'll have to take it to a professional...But that is what you were thinking in the first place?
Nick
Had experience of a small area of lacquer lifting (say, 150mm x 80mm) following removal of decals from the 'panel' between the rear lights on my Tuscan. A mate reckoned he could sort it.
We flattened the area off using 1200 wet & dry then misted on several coats of 'rattle-can' lacquer. Used mates electric polishing mop, and after several applications of G3 compound it came up fine.
Worst case, if you try a diy approach and it doesn't come good/you're unhappy, you'll have to take it to a professional...But that is what you were thinking in the first place?
Nick
Gassing Station | Chimaera | Top of Page | What's New | My Stuff