what salisbury diff pinion seal?

what salisbury diff pinion seal?

Author
Discussion

hallsie

Original Poster:

2,184 posts

219 months

Monday 29th April 2013
quotequote all
Hi All

I have ordered a pinion and diff seal, but it appears that the pinion seal I have is 78mm and the one sent is 74mm.

Can anyone confirm what model diff seal I need?

Thanks

Stu

P.S, I know its imperial, but its been a long night!

hallsie

Original Poster:

2,184 posts

219 months

Tuesday 30th April 2013
quotequote all
Or perhaps confirm what vehicle the diif is off of??

Stu

bluezeeland

1,965 posts

158 months

Tuesday 30th April 2013
quotequote all
Hi Stu,

Re the seal, dunno, the diff is Salisbury, standard on some jags (Mark something....)

sorry to be of little help !

Frank

oldgeebee

340 posts

155 months

Tuesday 30th April 2013
quotequote all
If it looks like this:



It's from a Jaguar XJ6 and is a type 4HU. This is not the limited slip variety (LokStop) but was the original fit on my 1979 3000S.

HTH

GB

hallsie

Original Poster:

2,184 posts

219 months

Tuesday 30th April 2013
quotequote all
oldgeebee said:
If it looks like this:



It's from a Jaguar XJ6 and is a type 4HU. This is not the limited slip variety (LokStop) but was the original fit on my 1979 3000S.

HTH

GB
Thats exactly the one, only shinyer (yours not mine at the moment!0)

Thanks

Stu

bluezeeland

1,965 posts

158 months

Wednesday 1st May 2013
quotequote all
Hi Stu,

Graham (oldGB) had his overhauled, parhaps an idea, now its out ? (make/buy decision, i know...)

F

hallsie

Original Poster:

2,184 posts

219 months

Saturday 4th May 2013
quotequote all
Im still struggling to source a Pinion seal for the diff.

Can anyone give me a part number or web site where I can get one from?

Thanks

Stu

hallsie

Original Poster:

2,184 posts

219 months

Saturday 4th May 2013
quotequote all
Adrian@ said:
It will be either 15386 or 15397, what have you already got?

Adrian@
It looks similar to the one on the left, the only markings on it is EP 8 and its 78mm od.

Have you got one?

Stu

jagracer

8,248 posts

235 months

Saturday 4th May 2013
quotequote all
hallsie said:
Im still struggling to source a Pinion seal for the diff.

Can anyone give me a part number or web site where I can get one from?

Thanks

Stu
Speak to Ray Ingman at Classic spares 0992 716236 on Tuesday, he'll be able to help. He does Jaguars but I'm sure he'll know which seal you need from a description of what you have.
Looking at the one I have I'm also pretty sure it's the same seal as fitted to the Land Rovers that use the Salisbury axles.
Just looked at a parts list and they seem to be either 39mm or 46mm (later model) inner diameter.

Edited by jagracer on Saturday 4th May 09:48

heightswitch

6,316 posts

249 months

Saturday 4th May 2013
quotequote all
Or why not just pick up the phone, speak to one of the 2 classic TVR specialists ADRIAN and STEVE who have the correct one s on the shelf, send some beer tokens and recieve a parcel in the post!!

How many times do we carry on round and round rolleyes
stroll on!!

N

hallsie

Original Poster:

2,184 posts

219 months

Saturday 4th May 2013
quotequote all
heightswitch said:
Or why not just pick up the phone, speak to one of the 2 classic TVR specialists ADRIAN and STEVE who have the correct one s on the shelf, send some beer tokens and recieve a parcel in the post!!

How many times do we carry on round and round rolleyes
stroll on!!

N
Mainly because I dont like to pester people and would prefer to do my homework first before I start asking!

By all means message me your number so I can hassle you for a seal.. wink

Stu

heightswitch

6,316 posts

249 months

Saturday 4th May 2013
quotequote all
hallsie said:
Mainly because I dont like to pester people and would prefer to do my homework first before I start asking!

By all means message me your number so I can hassle you for a seal.. wink

Stu
The other benefit of speaking to specialists is that they will also tell you to check that it is actually the seal gone...4HU's are known for oil to migrate up the pinion thread so when you change them you also allow for that possibilty too!

Ring Adrian or Steve.

N.

hallsie

Original Poster:

2,184 posts

219 months

Sunday 19th May 2013
quotequote all
Anyone answer me?

adam quantrill

11,535 posts

241 months

Monday 7th May 2018
quotequote all
Stu did you ever find out the answer as I may have the same problem to solve in a few days.

geertvanhout

87 posts

170 months

Saturday 2nd June 2018
quotequote all
on salisbury diffs two types of pinion seals are possible. both share the same outer diameter of 80.3 mm, but pinion seal inner holes differ. early ones are 39.8 mm ( 1 9/16" ) and the later ones are 47.6 mm ( 1 7/8").
the old stock seals have leather sealing flaps, whereas the aftermarket "modern" ones are in synthetic rubber.

with worn seal surfaces you can use speedy sleeves to conceal the worn area when fitting new seals so it will seal again properly. should the pinion flange be damaged beyond repair new flanges are available ( from me for instance). these replacements all have the larger diameter to match the later seal diameter.

hope this is of help. cheers, geert