The Christmas Mini - R53 Cooper S
The Christmas Mini - R53 Cooper S
Author
Discussion

BORNXenon

649 posts

15 months

Saturday 19th September
quotequote all
Mine had half a dipstick and god knows how many bits of plastic chain guide.

The honing tool I ordered turned up today, so I can get the bores honed when I've got some time, priority for the minute though is to change the gearbox on the R50, got a replacement hopefully turning up next week.

Ken986

Original Poster:

764 posts

155 months

Saturday 19th September
quotequote all
BORNXenon said:
Mine had half a dipstick and god knows how many bits of plastic chain guide.

The honing tool I ordered turned up today, so I can get the bores honed when I've got some time, priority for the minute though is to change the gearbox on the R50, got a replacement hopefully turning up next week.
I really hope I don’t need to go deeper into the engine.
I’m trying to get this on the road before winter kicks in.
The Boxster isn’t suited to winter roads and I really can’t use the Cayman either.

I just knew you would put another box in the R50 biglaugh

BORNXenon

649 posts

15 months

Sunday 20th September
quotequote all
biggrin
It's not a given yet, got the box cheap so going to strip it and check it over, make sure its not going to do the same thing.
Also need a passenger driveshaft as the one that's on it is knocking due to dumping all its grease through a split boot.

Gallons Per Mile

2,218 posts

138 months

Sunday 20th September
quotequote all
New dipstick looks shorter than the old one? Is it just the angle of the picture or did the mini get a revised oil level?

BORNXenon

649 posts

15 months

Sunday 20th September
quotequote all
Gallons Per Mile said:
New dipstick looks shorter than the old one? Is it just the angle of the picture or did the mini get a revised oil level?
Not as far as I'm aware, but the shorter dipstick will let you know about the inevitable oil leak earlier!biggrin

Ken986

Original Poster:

764 posts

155 months

Sunday 20th September
quotequote all
Gallons Per Mile said:
New dipstick looks shorter than the old one? Is it just the angle of the picture or did the mini get a revised oil level?
My excellent photo skills biglaugh
All good

haggi

897 posts

244 months

Sunday 20th September
quotequote all
BORNXenon said:
Mine had half a dipstick and god knows how many bits of plastic chain guide.

The honing tool I ordered turned up today, so I can get the bores honed when I've got some time, priority for the minute though is to change the gearbox on the R50, got a replacement hopefully turning up next week.
I thought I recognised the username from the eBay order, couriers booked for collection.

BORNXenon

649 posts

15 months

Sunday 20th September
quotequote all
haggi said:
I thought I recognised the username from the eBay order, couriers booked for collection.
Outstanding bud, thanks!
Knowing its coming from someone on here gives me hope its not a box of spanners like the one its replacing!

haggi

897 posts

244 months

Sunday 20th September
quotequote all
BORNXenon said:
haggi said:
I thought I recognised the username from the eBay order, couriers booked for collection.
Outstanding bud, thanks!
Knowing its coming from someone on here gives me hope its not a box of spanners like the one its replacing!
No worries, it’s such a small world, it’s out of the donor car for my R50 rebuild, I’ve got a 6 speed facelift box with lsd from a cooper s for my R50, i bought the donor car because it was low mileage and i needed the engine and wiring loom and aircon which my car didn’t, it was built as sprint car but im turning back into a road car, thread to follow soon.

BORNXenon

649 posts

15 months

Sunday 20th September
quotequote all
haggi said:
No worries, it s such a small world, it s out of the donor car for my R50 rebuild, I ve got a 6 speed facelift box with lsd from a cooper s for my R50, i bought the donor car because it was low mileage and i needed the engine and wiring loom and aircon which my car didn t, it was built as sprint car but im turning back into a road car, thread to follow soon.
Look forward to reading it, the more MINI content the better in my opinion! smile
I bought my R50 as a stop gap while I'm working on my R53 project. It was supposed to be a more reliable replacement for my Astra, but had it less than a week and the gearbox ate itself!
Been trying to decide what to do with it and given its only had 2 owners from new and only done 61000miles, thought it was probably worth saving. Needs a passenger door and a drivers window regulator too, but I'll sort those bits out once the gearbox is in.

Ken986

Original Poster:

764 posts

155 months

Sunday 20th September
quotequote all
Busy day today, photos are self explanatory










BORNXenon

649 posts

15 months

Sunday 20th September
quotequote all
Ah the obligatory half a dip stick in the sump! At least there's no bits of chain guide and the oil pickup looks clear, good news.

Ken986

Original Poster:

764 posts

155 months

Sunday 20th September
quotequote all
BORNXenon said:
Ah the obligatory half a dip stick in the sump! At least there's no bits of chain guide and the oil pickup looks clear, good news.
Yes indeed, I was holding my breath !

Surely I’m nearly finished …

BORNXenon

649 posts

15 months

Sunday 20th September
quotequote all
Ken986 said:
Yes indeed, I was holding my breath !

Surely I m nearly finished
At least someone is....

tallpaul26

774 posts

250 months

Sunday 20th September
quotequote all
To clarify, an R53 is never finished.

Ken986

Original Poster:

764 posts

155 months

Sunday 20th September
quotequote all
tallpaul26 said:
To clarify, an R53 is never finished.
Unhelpful biglaugh

BORNXenon

649 posts

15 months

Sunday 20th September
quotequote all
tallpaul26 said:
To clarify, an R53 is never finished.
Preach brother!

Jester86

689 posts

140 months

Monday 21st September
quotequote all
As soon as you think an R53 is finished. It'll find new and creative ways to take your money.

Lovely progress!

Ken986

Original Poster:

764 posts

155 months

Sunday 27th September
quotequote all




Once I fitted the sump again I made sure I gave the sealant plenty of time to cure.
I still haven’t added oil yet - must make sure not to forget !

Upgraded the front brakes to R56 Cooper S calipers and discs.

The list of work is definitely diminishing but as always, things start to drag.

A couple of issues arose with spare parts.
Borg and Beck handbrake cables - had to adjust the brackets on the subframe and give the tubes at the end of the cables a little bend so the ferrule sat snuggly in the calipers.

The front speed sensors, admittedly a cheaper option supplied by the motor factor, needed quite a bit of filing down to fit.

Next up, new air con compressor.
Plus loads of other stuff, big and small, before we are ready for the road again.

BORNXenon

649 posts

15 months

Monday 28th September
quotequote all
Damn new parts look good! smile
If it's any consolation, my list is much MUCH longer than yours!!
I fitted TRW handbrake cables and didn't have any fitting issues, other than one of the cables being faulty from the factory, they are however a very snug fit.