RE: 4 Stroke Redesigned

[Feliks]

This model can be mounted on the ends of the arms windmill ....
http://www.youtube.com/watch?feature=player_detail...

Andrew

[Feliks]

Hi-Fi Wind Amplifier...



Regards

Santa Claus

Edited by Feliks on Monday 10th December 02:12

[Feliks]

So interesting what you can find in my archives. The oldest Radioamator I found in my ...



Google translated :
"According to information published in one of the writings of English - has been developed by researchers at the concept of electricity generation by passage of ions and electrons with very high speed through a magnetic field
The practical implementation of this method that was based on Plasma gas forcing by the strong magnetic field. Electrical power of 1000 KW can be obtained by passing the said plasma at 3 times the speed of sound, the magnetic field of 1 meter long between the poles of a magnet at a distance from each other by about 15 cm. No, you would need the boilers and steam turbines. Previous experiments have generated so far a small amount of electrical energy. Achieving the full effect expected after several years of further intensive tests conducted"..


A song about Christmas Eve from Santa Claus :

http://www.youtube.com/watch?feature=player_embedd...

Edited by Feliks on Sunday 16th December 11:22

[Feliks]

Maybe the exhaust manifold to the F1 wear a magnet and additional energy (electricity) have?


Do not give me those numbers alone ... When linearly decreased as the amount of energy ... it
5 cm in diameter and 1 meter length of pipe that is 10 times less that is = 100 KW
The flow rate is not 900 m / s just say 200 m / s that is to say 4, 5 fold less = 22KW ...
For each cylinder?

Andrew ??

[Feliks]

How can I bypass the statutory 20 mm in diameter ... and we have a little more air in the engine intake manifold

http://sae.wsu.edu/media/0708car/08-03-10/




And here, if the exhaust pipe wrap neodymium magnets .... I have a small MHD...

http://sae.wsu.edu/media/engine/target0.html




Andrew

[annodomini2]

Exhaust gas temperatures aren't high enough to be plasma

[Feliks]

annodomini2 said:

Exhaust gas temperatures aren't high enough to be plasma

Plasma theory can arise as early as 0 degrees Kelvin

http://en.wikipedia.org/wiki/Plasma_(physics)

http://en.wikipedia.org/wiki/List_of_plasma_(physi...

Andrew

[annodomini2]

Feliks said:

annodomini2 said:

Exhaust gas temperatures aren't high enough to be plasma

Plasma theory can arise as early as 0 degrees Kelvin

http://en.wikipedia.org/wiki/Plasma_(physics)

http://en.wikipedia.org/wiki/List_of_plasma_(physi...

Andrew

Ok I'll rephrase, there is no plasma in exhaust, it's not ionised, if it was, every internal combustion engine on the planet would be chucking out ionising radiation.

[Feliks]

annodomini2 said:

Ok I'll rephrase, there is no plasma in exhaust, it's not ionised, if it was, every internal combustion engine on the planet would be chucking out ionising radiation.

With the formation of a spark to the spark plug, the air between the electrodes must also be ionized, otherwise the spark will not jump between the electrodes. It is a prerequisite to the formation of a spark, prior to the creation of high voltage causes ionization. Here is enough to ionize gases also high voltage spark ..... does not have to jump ....

Then, the ions are separated using a magnet on the positive and negative. Collect them get placed along the pipe and create a steady stream of negative and marked advantage. hot exhaust gas is easier to ionize ( in electric hight voltage field) as a result of high temperatures.

It is very generally ...

Andrew

[annodomini2]

Feliks said:

annodomini2 said:

Ok I'll rephrase, there is no plasma in exhaust, it's not ionised, if it was, every internal combustion engine on the planet would be chucking out ionising radiation.

With the formation of a spark to the spark plug, the air between the electrodes must also be ionized, otherwise the spark will not jump between the electrodes. It is a prerequisite to the formation of a spark, prior to the creation of high voltage causes ionization. Here is enough to ionize gases also high voltage spark ..... does not have to jump ....

Then, the ions are separated using a magnet on the positive and negative. Collect them get placed along the pipe and create a steady stream of negative and marked advantage. hot exhaust gas is easier to ionize ( in electric hight voltage field) as a result of high temperatures.

It is very generally ...

Andrew

The High voltage creates an ion path (see lightning, spark gap generators), but only at the local point across the gap, the rest of the ignition is a flame front, ignited by the spark, but perpetuated by the fuel air mixture.

The ions, if any, are very few as the temperatures are too low. Yes, plasmas can be created at low temperatures, but not under the conditions of internal combustion. Even if it was plasma, it wouldn't stay that way for long. As it cools very quickly and strips electrons from the air.

The exhaust energy generation systems use thermocouples.

The system you are proposing is already in development for some Fusion reactors, that produce focussed ion beams.

[Feliks]

Systems for the production of electricity, does not necessarily have to be associated with nuclear reactors and thermonuclear. This is a completely different part of the business, not necessarily possible with high efficiency to execution, or very dangerous, because you can not stop the nuclear processes. you can continue working on it, but the practical application is under a big question mark.

The use of thermoelectricity is already used, but also efficiency are not high, however, can be used to supplement the MHD generator.
MHD generator with optimum effect, as some researchers may have thermal efficiency even at the rate of 70%, which makes this method of energy production at the highest point. Therefore should be to grow the study.
Plasma production, even in the gases at ambient temperature, is used for cutting of metals, for example. Of course, even the catalysts are also used to facilitate the formation of Plasma. You do not need plasma with such a high temperature, low temperature plasma just this, that arises in the MHD generator-powered coal-dust .......
Such a relatively high temperature and speed of gas flow, should provide a very efficient production of electricity.
Especially since you can use this energy, which at the moment we throw uselessly through the exhaust

http://www.hypertherm.com/en-us/Training_and_educa...

Andrew

Edited by Feliks on Tuesday 18th December 09:23

[Feliks]

A little figures and history...

http://encyclopedia2.thefreedictionary.com/magneto...


Half an hour after birth... Xmas
http://www.youtube.com/watch?v=vSQKqbewYX8

Andrew

Edited by Feliks on Saturday 22 December 13:51

[Feliks]

Some experience with Palasma. In the film, the plasma is formed, even when the current is flowing in the nano-amperes...

http://www.youtube.com/watch?v=t7s3cvm6CfY

And here is video showing that you can do in addition to current, lovely music, which instead of ordinary hum, will be extracted out muffler...

http://www.youtube.com/watch?v=ISA4sXOyyQI

http://www.youtube.com/watch?NR=1&v=G9bT50QZO1...

http://www.youtube.com/watch?v=xXskcNwXIHA


Even serious business, what comes out of mufler treat seriously"
" Designing any exhaust system today is a challenge – especially when it is for an iconic sports car with a famous sound signature. Ricardo’s WAVE software was used by Porsche engineers in the development of the latest 911 model"

Regards Andrew and sends best wishes for New Year.


My private hand made plasma for cut 100 A



Cutting Torch :
http://www.google.pl/url?sa=t&rct=j&q=abip...

[TIGERSIX]

chuntington101 said:

Looks like some has already got a half rotation engine to work....

http://www.ls1tech.com/forums/advanced-engineering...

Cheers,

Chris.

Very Interesting afternoon spent checking this out WTS

[Feliks]

Another way of getting electricity from hot exhaust pipes. Termionic generator, such as the electron tube. Current density obtained is about 10 watts of 1 cm square area of ​​the outlet pipe

http://fti.neep.wisc.edu/neep602/SPRING00/lecture9...




Of course, the acquisition of the MHD generator, which has electrodes inside..

To assist the electron reactions, a high voltage can be applied, as in TIG welding machines,..

Andrew

[Feliks]

But nothing to prevent the high temperature of the inner cathode acquired using shale gas, or coal
if we pipe with a radius of 10 cm heated, it will receive its length 1cm, 600 watts, which is enough for the house to its length of 20 cm or 12 KW .... ....
Extremely small heating stove diameter 20 x 20 cm, and everything we have in the house for electricity, including heating ..
In this case, the inner tube should have fins to really depriving heat of combustion.

Andrew

[dilbert]

Feliks said:

So interesting what you can find in my archives. The oldest Radioamator I found in my ...



Google translated :
"According to information published in one of the writings of English - has been developed by researchers at the concept of electricity generation by passage of ions and electrons with very high speed through a magnetic field
The practical implementation of this method that was based on Plasma gas forcing by the strong magnetic field. Electrical power of 1000 KW can be obtained by passing the said plasma at 3 times the speed of sound, the magnetic field of 1 meter long between the poles of a magnet at a distance from each other by about 15 cm. No, you would need the boilers and steam turbines. Previous experiments have generated so far a small amount of electrical energy. Achieving the full effect expected after several years of further intensive tests conducted"..


A song about Christmas Eve from Santa Claus :

http://www.youtube.com/watch?feature=player_embedd...

Edited by Feliks on Sunday 16th December 11:22

It's funny you should mention that. I was recently looking at a pile of YT vids, all about Joseph Papp's Nobel Gas Engine. It sounds like that scheme which you refer to here.

Kind of interesting, but I doubt it's over unity as suggested by Papp.

Another interesting thing I've been looking at recently is Quasicrystals. (Quasi Periodic Crystals).
I was aware of Fullerenes but not Quasicrystals until recently, despite their discovery being fairly coincident in time.

I now wonder about applications for Quasicrystals. Apparently they are good electrical and thermal insulators despite usually being alloys of aluminium.

Perhaps not very dynamic, but a metallic insulator is quite a useful bushing material at the least. I'm sure there must be some more novel uses.

BTW....

Your plasma cutter looks properly dangerous!

Edited by dilbert on Saturday 9th February 03:14

[Feliks]

Here, such a concept of the new engine to the bicycle. Will definitely help in fast biking, be using any fuel ... I wonder how, in practice, this will help ... This will definitely help ... can at all do not have to pedal?




http://www.lasaero.com/site/products/article?id=R0...


http://www.youtube.com/watch?v=KUSklh3MKtA


http://members.eaa.org/home/homebuilders/building/...








Andrew

[Feliks]

And all it may seem laughable, were it not for the dimensions of the venturi nozzle, which can this piece of brass with a film about the rate gyro, spin up to 10 000 rpm at 40 km / h ...



Andrew

[Feliks]

Of course, I see that freed the next ideas of something we are very happy. Introduced only basis to be developed. Now I am going to have such a number, which encourages the implementation of this idea. Venturi nozzle is one in the figure is the front surface of 3.14 x 2.1 x 2.1 = 13, 8 cm sqare.
6 pieces battery has 6 x13, 8 = 83.0 sqare cm. that is, it is only the surface 8 x 10 cm ....
A man riding a bicycle is at least a surface of 50 x 50 cm = 2500 sqare cm. Theory can obscure the surface without loss, for which he will be hidden. So such sixpack can theoretically put 2500/83 = 30 pieces ... without magnification face of the rider. So these 180 pieces of brass drums ....

Andrew