RE: 4 Stroke Redesigned

[Feliks]

Well, you know that I have my myasthenia, 5 years and I have confirmed AChR antibodies .. My last resort is how bad it will be to be able to make me Plasmapheresis. It is a procedure of blood exchange in my body and depriving it of harmful antibodies .. I was quite interested in it because it can concern my health directly .. It is based on the fact that from my blood, apart from my body, these antibodies are gradually removed from her and back into my bloodstream .. when it is cleansed twice, more blood than I have, it can be full. Unfortunately it is not a complete cure, but for a longer period of time .. It is a bit similar to kidney dialysis .. which also removes toxins from the body ..
And now I came up with a new method of cleansing the blood without releasing it from the body, which is much safer because the blood will not infect. The invention of the method also came after inspiration by President Trump, who dreamed of disinfecting the body from inside ..


I decided to call this method of blood disinfection Trumps Medicine. That is why I call it Medicine, because it is a completely new way, presumably allowing us to quickly get rid of many diseases of bacterial or viral nature ... that is, most of us oppressive diseases .. It consists in the vein, like during dialysis, we insert a needle, but with a needle no blood flows and we put a sterile optical fiber in it and seal the connection so that no bacteria get into the vein. Now we let in UV-C light that disinfects the blood from bacteria and viruses. Of course, we must carry out animal tests beforehand, what power of light can we use and at what frequency of spectrum ... dialysis lasts about 5 hours and a total of 50 liters of blood flows through the dialysis device .. I think that in this case turning on the UV-C socket for such a long period can effectively sterilize blood from unwanted viruses .. light can have several milliwatts in power and a pumping device for an optical fiber, this radiation can have several milliwatts and be powered by batteries .. in this way, even when walking, we can "heal" quickly and accurately .. But this requires careful analysis and selection of power, frequency, type and usage of this .. I think that for starters, tomorrow the leading laboratories should already introduce fiber optics into the veins of animals and explore this extremely promising method .. The production of a diode laser at such frequencies recently, allows the fiber to be pumped, and the exact manipulation of it. Also, after developing the method, you can absolutely choose a sterile method similar to that used in emprom memories erased by ultraviolet through a special window. Namely, such a window can be implanted in the vein, and through it do not dose this ultraviolet, which will be a completely sterile method of "treatment". Here are some links that may be helpful for developing this branch of medicine .. Because it seems to me that we will also have an impact on cytokines and storms exerted by them ... but it is experience that must show and appropriate ways ..

https://corporate.jp.sharp/rd/n36/pdf/104_08.pdf

https://phys.org/news/2020-01-laser-diode-emits-de...

https://www.lasercomponents.com/de-en/product/uvb-...

https://www.sciencedaily.com/releases/2020/01/2001...


Andrew

Well, there is already a medicine for my myasthenia gravis, but because of the amount of my retirement I am not in danger of using it ..
His name is Soliris https://alexion.com/our-medicines/medicines/soliri...

[Feliks]

For now, the first animal experiment is successful Trumps Medicine and the fish don't die ...
And the leds are with or without ozone access ... I think that the newly created medicine department at the University should examine the rest and determine ...


https://www.youtube.com/watch?v=ODss_J26Tuc

https://www.youtube.com/watch?v=5tQfzKAz5ic&fe...

http://www.geni-uv.com/

https://www.oxxius.com/applications/biophotonics/

Andrew

[Feliks]

Well, I will explain why the dose of this UV-C may be microscopic .. because the vein has a small diameter, maybe 3 mm, and the intensity of UV-C light decreases with the second power (with a square distance) ) at such a small distance, the light is very close to the virus, and even its low intensity will damage its DNA ..

You have to bury some in the history of medicine .. They tried UV with it a long time ago

https://www.nobelprize.org/prizes/medicine/1903/fi...

https://www.crr.columbia.edu/research/using-power-...

Andrew

[Feliks]

Feliks said:

In my latest solving the oscillatory dynamo, a diode who exchanged the changeable oscillatory electricity for the electricity about the permanent polarity was crucial element
Such an element fulfilling identical functions as the diode exists in the hydraulics of theses. There is a valve one-sidedly letting it in to water. it is opening for example only then when the pressure from the feeding side exceeds certain described by the threshold e.g. 10 bars. When the pressure is on the feeding side it is smaller, the valve is closing it oneself. and doesn't allow for moving back waters.

The principles of operation are the same like at pumping the bicycle wheel up with pump, but will refer to water. In this way we can hold. in the pipeline pressure e.g. 10 bars, and from leaking out of the pipeline who will be above the pump e.g. 100 metres will be sailing out water.
The one straight line I decided to use the principle for the production of the electric current with the help of sea waves. Although he is supposed to produce the electricity, it is being imported these are for inflating the problem waters sea into the container with water sea e.g. to height 100 of metres, or similar (e.g. on high cifie bank). The rest is known and professionally made as the normal power station aqueous, but in this case she will be to sea brine. isn't buying it special one should actually solve the difference, only a matter of the precipitated corrosion .


Particularly that such a very similar solution was already on an island applied Okinawa, in the version of the power station pumped storage (but pumping into the container with the help of the electric energy- classic pumped storage).

Into my to pump the version this brine there will be sea waves driving water pumps with valves with diodes into the container Leaking in water only in direction of the container. pipes from pumps into the container will also have middle diameter, in order to in the time of whom from valves, not to waste the energy from different good pumps. Unfortunately the number can reach such pipes even 1000, at the productivity every e.g. 1 m^ 3 / sec.
But by it we can get the power of such a power station 1000 of the MW .

Costs of making such a power station will also be smaller, since for her devices won't have to pump water into the container how it is in classical power stations of this type. Machines will be so like by a normal hydroelectric power plant straight lines and no high cost.

http://www.new4stroke.com/salt%20water%20pumped%20...



Also shortened descriptions Polish pumped - storage to slight differences of the water levels (100 m) is describing http://www.pistonheads.com/gassing/topic.asp?h=0&a... or
http://www.new4stroke.com/plants.pdf


Gross from many centuries of coasts England and Ireland they were attacked by marine waves .
People built obstacle for these waves sometimes, that they did not prevent from life on islands.
I think that would end this immemorial war goods , and invite this ocean on coast, but that it is high, it belongs it help. It belongs to take advantage it waves, in order to they pumped on its high coast of water.
I think, so around England shall made this power plant
More belongs to place in ocean for water pomp e.g.

pistons type , or my idea half rotate, which will drive usual floats clinched for they behind assistance of rope. Ordinary belongs to place behind each pump bolts, which will be opened e.g. at 10 kG/cm2 (Acting similar for diode I my oscillating dynamo) and which for collect tubes for reservoir on high coast miss water drive it.
Collecting tube should for example for flow 1 m3/sec 0,6 m have diameter.






For achievement in such this collecting tube of flow 1 m3/sec and 10 bar , requirement 12 pump wanted for transport water on according to following specification 100 m height too reservoir.

Pump reconciles, for simplification about normal piston, should have 0,6 m diameter, and 3 m of height. During average jump of rippling 2 m, it will give during one cycle for composite tube 0,5 m3 water pushed (S= 28 dcm2 H= 20 dcm (2 meter) = 560 dcm3 (liter). For set up flow 1 m3, TWO such pumps should pump for collecting tube.
Taking into consideration that the peak of wave used to the work is coming every 6 seconds one should multiply the score through 6
For proper fabrication of pressure on exit of pump ( set up 10 bar ), wanted proper swimmer is.
There is simple account surface of piston of pump will together page (S) x 100 surface of swimmer.
In my example, surface of piston of pump it 28 dcm2, it signifies that swimmer)should have 2800 dcm2. In order to swimmer had such surfaces, it must have 20 m diameter, and definitely 1 m of height. It needs one kit about 12 pumps 12 swimmers 20 m each diameter, or about dimension one swimmer 12 x28 m2= 336 m2.

For behaviour some reasonable spans, it is possible to accept, that for such array for production capacity 1 m3/sec 10 bar, wanted near 700 m2 place rippling sea .

Need for continuous supplying tank for power station theoretically 700 m3/s (716 MW , 100 m height ) requirement 700 x 700m2 = 490000 m2 rippling sea . It is theoretically only 700 m x 700 m !, when 2 m average heights of waves.


Here, mathematical enumeration same only:

To 1m3/ sec
1 m^3/sec 10 bar(H=100m ), 600 mm diameter pipe and piston pump, S= 28 dcm2 Hwave= 20 dcm (2 meter) = 560 dcm3 (litre) for 1 m3 need 2 piece . but period are 6 sec , sum 6x 2 = 12 piece pump .

S pump= 28 dcm2 , 10 bar, F =28 T, Hfloat >1m, S float ~~=2800 dcm2 (28 m2) , D float =~~20m
12 piece x28m2 =336 m2 ~~ =100m x 7m using area =700 m2

700 MW (700 m3/sec), H=100m
700 m2 x 700 = 350000 m2 . ~~700m x 700m area of wave



As elements are presented from marine waves over system production current professional , they are built in the world already and test, additional requirement of experience for their building not.
Another, very important information in relation to the system. System the one should be only as storage, rather than storage-pumped what significantly the height of investments will lower in comparing to current answers. Costs will only be so like for an ordinary hydroelectric power plant
Only water pumps with valves (diode) can so that touch up still and selected materials. but in general, it is piston pump known for the antiquity. Summing up, mechanical problems are solved, and with the appropriate swing one should only build such a power station.
The degree of the safety of such containers will also be very high, since put very close the sea, in case of the breakdown of unsealing, they won't cause heavy losses, since water quickly will find its way back to the sea.

I think that wonderful geographical conditions will permit on high cliff Scotland England and Ireland, to build such containers into whom sea, highest waves will be pumping brine on average in world a lot. it means that the efficiency of such a system will be most effective in world, and therefore built containers should be around these countries what in the future can guarantee the green energy for all countries Europium.

Regards Andrew

Edited by Feliks on Thursday 26th March 14:46

There is strength in water ... I discovered it in 2008, publishing how to obtain electricity from sea waves in a relatively easy way. You need sea water with the help of waves, pump to a high sea shore to a large salt water tank ... .. For pumping, use thousands of small water pumps, driven by small floats .. Recently, I even managed to find a film that perfectly explains to everyone what I mean .. Instead of a man, you should put a water pump, which with the help of a float these 100 l of water will pump .. You should set up such layouts, one hundred or two hundred, cover them with the entire sea shore .. The way I came to this is in my publications, since 2008

https://www.new4stroke.com/fale%2011.mp4

Andrew

[Feliks]

One person 100 Kg 1 meter up and down gives 1 KW each time...



Of course, railings in such a "power plant" are not necessary ..


Andrew

[GreenV8S]

Feliks said:

One person 100 Kg 1 meter up and down gives 1 KW each time...

No it doesn't - KW is not a unit of energy.

[Feliks]

GreenV8S said:

No it doesn't - KW is not a unit of energy.

Ok, ok , per second.. This is just an example .. the waves are every 6, 7 seconds ..
or maybe 3 people standing, then the upward movement would also be possible, with such a size of floats .. and for one every 1 meter in length they can stand ..

Andrew

Edited by Feliks on Thursday 6th August 01:04

[Feliks]

https://www.new4stroke.com/boat.mp4



https://www.new4stroke.com/fale.mp4









Andrew

Edited by Feliks on Thursday 6th August 09:12

[Feliks]

Yes, here it is a source of inexhaustible energy .. Its density is 1000 times better than that of air .. so the devices can also be 1000 times smaller





Here instead of a water pump, this pier can drive generators directly instead of wheels ..




And here is a film that shows that such a motor (half rotate) cannot be effectively braked A for waves, it is enough to make sufficiently long arms, and it will also work with great efficiency.

https://www.new4stroke.com/drezyna.mp4


Andrew

[Feliks]

Well, the hepatitis virus circulates in the blood and is also transmitted through it ... So after its removal from the blood, my method of "Trump's Medicine", using UVC light applied to a vein with a fiber optic cable, theoretically should cause his death, as well as trash of various other viruses in the blood .. About the fact that this is a possible method, despite the fact that this light can damage other small organisms in our blood, is the fact that despite long-term storage of frozen blood, its basic values ​​do not disappear, but probably most of the particles such as viruses disappear .. Of course, the small antibodies also disappear for sure, because they are individual, and the transmission to the recipient is rather not possible fully, so their absence in the obtained blood is not a parameter qualifying blood as a life-giving for us the liquid .. after its defrosting .. So that cleansing the blood of these particles, good and bad, is possible by using a gentle method of influencing it UVC sheets. Until now, the use of blood purification is carried out extracorporeal, in such a way as kidney dialysis or photoplamapheresis .. As suggested by this purification of blood in an intracorporeal way, without its removal outside, which is a much safer and sterile method. UVC light can be microscopic, because the distance of the optical fiber in the vein, from the blood, is not greater than 3 mm, and the ability to penetrate it while neutralizing viruses, decreases with a SQUARE distance .. Therefore, I think that even a very small intensity of this UVC can be of the order 1 to 2 mW may already have a fully healing effect .. But this power should be established experimentally to be sufficiently healing and least influencing for other elements good in our blood ... which certainly should not take years of research .. Also the improved method, such as sticking a miniature "window into the vein" of quartz glass, which could serve us for life, to irradiate our blood by a therapeutic dose of UVC in an absolutely sterile manner, is further development of "Trump's Medicine", which can bring us a path of rapid recovery from many diseases that plague us. And it would probably be useful if such a modern branch of medicine was created, because it may contain the least side effects for our body. what other medicines and vaccinations contain ..



https://www.nobelprize.org/prizes/medicine/



https://en.wikipedia.org/wiki/Plasmapheresis



https://en.wikipedia.org/wiki/Photopheresis



Andrew

[Feliks]

I would also add, young people who can be fooled with masks and strictly adhere to this .. As the Professor rightly writes about the infection and the severity of the disease, the QUANTITY of the virus decides, Now let's imagine that we are already infected, but asymptomatic and without knowing it, we wear a mask, which stops almost all the viruses that we exhale .. Suddenly, with our next INHALATION, the amount of the virus in our body increases, and of course we will get seriously ill .. And for that it is enough to be familiar with basic medicine and have some common sense .. if we did not wear a mask , these are the viruses that we exhale would leave our body completely, and those that would remain, at most asymptomatic disease, would support the disease, or with minor symptoms, because our perhaps not even the best immune system would cope with them ... Yes, even if some viruses will come to us, they cannot be cut back to the environment in the form of a mask, because simply too much . We want to increase their amount in our body, much more than we have come from outside .. .. And this simple logic cannot be questioned by ANYONE .. So, if you want to LIVE, do not wear a mask, because even if you get sick , you will arrive with little symptoms, as with the classic flu .. And the fact that the whole world has gone crazy and you see the pictures as it is now, it does not mean that you have to do the same as in the pictures .. Because this is about YOUR LIFE. .



Please use Google translator ..

https://www.onet.pl/styl-zycia/onetkobieta/koronaw...

Well, I think I've come up with the best vaccine for Coronavirus yet ..! Supposedly, a vaccine, that is, in general, introducing a small amount of viruses into the body to stimulate our immune system to fight these pathogens, and the production of appropriate antibodies so that, when such viruses encounter such viruses, they can fight them. it depends not on the "vaccine" as such (watery liquid), but on our own ANTIBODIES produced by it, which theoretically protect us from getting sick .. So we need ANTIBODIES, not "vaccines" ... Where can we get ANTIBODIES from? . Well, it is enough that we get infected, but with a LITTLE amount of viruses, and the body will produce these antibodies for us ...! What does it take to get infected with a LITTLE amount of viruses? Well, WE NEED TO PULL THE MASKS FROM OUR FACE! And of course, then avoid staying with seriously ill people for longer than 15 minutes, as the Professor explained to us. Then you can do a two-day self-quarantine without leaving your home, so that the body has the strength to produce these antibodies, even still being sick asymptomatically, .. and we should ALREADY BE CIRCLED by the coronavirus, the germs of which have reached us .. I think that such "vaccinations" should be FORCED, otherwise this pandemic will destroy us! Well, being already "hooked", we absolutely must not wear any masks, because they, despite vaccination, may prevent us from expelling viruses that do not harm us in a small amount .. I think that a decree should appear on November 2 , about such a COMPULSORY "VACCINATION", for ALL CITIZENS. I wish you good health!

Andrew

[Feliks]

Today I will propose the fastest and most powerful STEAM locomotive in the world. It consists of two parts: the first is the most modern electric locomotive currently produced. Surely it has all the necessary things that are needed nowadays .. the second part connected to it is a steam boiler driving a half-rotary star engine with many "cylinders" (e.g. 60 , or in other side 120 )), which can produce about 10 MW of power .. And it drives an ordinary large generators, also with a power of the order of 10 MW, which gives electricity to the first segment - an electric locomotive .. In this way, we avoid many limitations of a classic locomotive, and the efficiency of such a system is greater, because the cylinders do not have half rotate crossheads, on which a lot of energy is lost ...
And this is how the age of the couple is not over yet, and I will be used, for example, in such Africa for many years. Greetings to everyone and let your heart pair up, this is the way I will go ...

Now we can get excited, probably we will be able to speed on the railroad track .. here is the electro-locomotive, which set the world speed record of 357 km / h (ES64U4). Considering its weight, it is a good result .. now, I suggested that she should do it, without electricity in the network, but only an attached "steam locomotive" which generates electricity for her ... in the amount of about 10 MW.


And I think that such a set can be more economical in terms of thermal energy consumption than traditional transmission from power plants through the electric network to the railroad tracks .. Here, with such transmission, we have about 30% losses ..
Now, if we add to this the depreciation and maintenance of the expensive transmission network, which may be in the amount of another 20%, it will give us a number of 50% savings for such a solution ..
And all this thanks to the half rotate engine (as a further development of the new 4 stroke), as a steam engine, which is also more efficient, because its "pistons" do not rub against the cylinder walls, and it does not have to have a crosshead.












Andrew

[Feliks]

Well, such questions arose, so I answer ..
Questions.
1. Why is an electric transmission from your crazy oscillating engine, an associated generator and the electric traction motors more efficient for a steam locomotive than direct mechanical traditional dual acting steam pistons or a steam turbine?
2. Why is the on board steam generation with whatever fuel is being burned to heat the water in the boiler more efficient than a large scale power station and transmission via catenary or third rail?
3. What fuel does your locomotive use?
4. Why not use your engine to power the wheels directly?
5. Did you know that steam turbine-electric locomotives have been tried before?


Ad.1. Here you are right that you call it crazy oscillating ... Because as you can see the madness comes from it, it is 20 times lighter than a traditional engine, for the same displacement .. And it results from mathematics and is indisputable .. Or maybe even be 50 times lighter, because thanks to the reduced weight, we can get much more revolutions and thus obtain more power, but if we still need the same power as the traditional one, we can reduce the stroke volume, and the engine will be lighter than 50 times .. And that's how you well-called the crazy property .. Here are some drawings to help you understand it. And the fact that the "cylinder" is lifetime, this also matters and can only be machined with an accuracy of 0.5 mm. The "piston" does not rub against the cylinder, and the method of transferring the operating gas force is much more efficient, because there is no traditional cross-section where some 20% of energy is lost.







https://www.new4stroke.com/drezyna.mp4

It is a pity that Newcomen did not come up with this solution for a long time, but it was very close .. :lol:






Here's a story, like this idea, of it
engine was established.

http://www.new4stroke.com/images/Possible%20mutati...



Ad 2. Because simply by transmitting electricity to further distances, we have 30% losses on network resistance and transformers .. When you add the costs of building and maintaining such a network, we can add 20% ... so we have 50% savings ..

Ad 3. Any, such as we have at hand and is the cheapest for us .. From wood, through coal, oil, gas ..

Ad 4. I have previously published such solutions .. You can choose what seems more beneficial to us..







Ad 5 . Yes, but they did not catch on, the steam turbine has its drawbacks to such a solution .. especially it is not so efficient at low revs .., it cannot be used for driving backwards, etc.
https://en.wikipedia.org/wiki/Steam_turbine_locomo...

Andrew

[Feliks]

In one place..
https://andrew53648.wixsite.com/mojawitryna

Andrew

[Feliks]

Well, now, since we do not really believe in the old rules of the heat engine * because as it turns out, the "cold engine" also exists, I will try to explain why such unique advantages of my new 4 stroke come from ..
Well, in a traditional engine, the speed of fuel combustion reaches a speed of about 30 m / sec. mIt is not that much and the duration of this combustion causes a heat transfer to the walls of the cylinder, the piston bottom and valves ... because it's time ... I in my engine, by accident (I could not get the ignition spark, because the speed was too high in " chamber "caused that the air ionization, which is necessary for the formation of the ignition spark, could not take place, because it was blown away by a large mechanically forced speed between the electrodes of the spark plug. I even got one blue smoke that would testify to burning .. If not for my first prototype, which ignited perfectly in the first revolutions, I would probably give up further work on this engine .. 1 4 days is a really long period of testing .. But I started to have fun , search the biblotehs about the mechanism of spark formation, and I found the reason .. Transfer I used the speed that could have been in the channel where the spark plug was contacting, and it turned out that even at relatively low revs that are needed to start, the speed in the spark plug channel was around 300 meters / sec, i.e. Mach 1.
If, instead of the spark plug, there was a diesel injector, the engine would probably ignite immediately and its speed as a diesel engine could be as high as around 10,000 rpm. because the speed of 300 mtr / sec is 10 times higher than the combustion speed in a normal engine .. But I had a gasoline version, I had to disassemble the engine and dig this channel in the head, and maybe the speed in it was as high as 100 m / sec, which allowed ignition spark and normal engine work .. But still 100 m / sec and 30 m / sec, it is 3 times higher combustion speed, due to these mechanical forces .. And this 3 times higher combustion speed in real terms, it can actually affect the thermal efficiency engine, and much more than you might expect .. Therefore, the current considerations on the thermodynamics of the engine are largely outdated in relation to my new4stroke .. which additionally has a unique small combustion chamber below the smallest piston .. where practically only combustion takes place in a vortex of enormous velocity forced by its small cylinder




, additionally. here are two videos, one about the experiment of flame spreading in a pipe filled with a stoichiometric mixture with fuel,

https://youtu.be/gRHmjFEWSHk?t=67

and the other about the flame's front face, which we can easily see. If the flame was moving 10 times faster, as is possible for me, it would not be so easy to observe ...

https://youtu.be/jdW1t8r8qYc?t=111

That's it for this Christmas this year ..

Andrew

[Feliks]

Well, finally, a movie that shows that there is a cold-driven engine. this refutes a bit the current theory of heat engines, it also extends it to "cold" engines. So the Lord Kelvin's laws only work in a narrow range of reality .. Here, shown how a tightly corked plastic bottle changes the volume of soybeans as a result of pouring cold water on it .. So there is a vacuum inside it. This negative pressure can be introduced into the engine under a vacuum, such as in aviation pneumatic applications powered by negative pressure from the Veturi nozzle during the flight. and it is imaginative that, however, we can make such an engine, using a few bottles and valves, which all the time, when the cold comes to them, will give them a vacuum and the engine will rotate all the time. Here is a movie and the principles of operation of the engine on negative pressure. Well, maybe the global warming will not threaten us.



https://youtu.be/NvV5bD7Scg0?t=4



https://www.youtube.com/watch?v=f2thngd9AGI




Andrew

[Frenchenstein]

LinleyA said:

I suppose the idea is to take the poppet valve out of the gas flow giving a less restricted run into the combustion chamber. A bit like the old sleeve valve engines.

Didn’t the “sleeve valve engines” burn buckets of oil. I seem to remember the WWII Wellington bomber was powered by this type of engine (could be wrong; I wasn’t even born then).

[Feliks]

And I have to help again! In order to free the ship in the Suez Canal, it is necessary to place special airbags at the front under its hull, used by rescuers during construction accidents and fill them with air. They will raise them, but maybe they will allow them to run off into the water.

https://www.savatech.com/products/lifting-bags/fla...

Andrew

[Feliks]

To really change something about these big engines and their emissions, you have to use completely new designs that already exist .. but this requires completely new knowledge .. For example, modern books on basic level combustion engines have, say, 1000 pages. in the first chapter, let's say the first 50 pages usually discuss the basic values ​​of engines, such as their displacement .. The next 950 pages is a further development of the engine, but resulting from the first feature .. Now, if we change something in this first part , about this displacement, then the next 950 pages, resulting from the new understanding of it, i.e. the 950 pages, will be completely different ... instead of a new one, and also in the number of 950 pages. It will be approximately as long as you acquire knowledge of these 950 pages, and even t longer because the old knowledge should be discarded ... because it makes it difficult to acquire the new one ... So, in order to freely design such a completely new engine, you have to learn its properties from scratch for about one year ... coming to this knowledge on your own, it would take you several years .. and not necessarily all the right paths could be hit .. I can assure you that the effort put into this science will really bring revolutionary results when it comes to engines .. in all its properties ..
Because you must know that the real new is not only a patent description of the new engine ..

Eg.book http://www.mediafire.com/file/u2bc2fp6td2bp52/Inte...

Happy Easter !

Andrew

[Feliks]

Well today I published my article about the basics of my new4stroke engine as a preprint, but on the very important site SAE.org
Here what is this SAE for the automotive and aviation industries.

https://en.wikipedia.org/wiki/SAE_International

The article can be downloaded and commented on. This is my first step on this platform ..
To understand this engine, you need to slowly learn it from scratch .. to be able to design its wonderful properties ..

https://mobilityrxiv.sae.org/

Andrew