VXR8 Indicator Rapid Flash - wierd fault
Discussion
Tried the updated yellow dot LED module. Made no difference at all. As far as I can tell all the LEDs in the lamp are working. Also seems to be temperature related. A cool early morning and get the fast flash whereas in the midday heat it sometimes works ok. Presumably if some LEDs were out I would have a permanent problem. Got to get this sorted for the MOT but at a loss as to where to go next.
Hi folks,
Sorry to bring up this well worn old thread again but has anyone had it where the indicator only rapid flashes when warm? It seems reading previous comments that all others seem to do it in cold weather. Mine of course, has to be opposite.
I'd imagine that there must be a little expansion going on in the unit when warm thus highlighting the failings of a cracked/dry joint or something along those lines.
Looks like it's dismantle and solder time methinks...
Sorry to bring up this well worn old thread again but has anyone had it where the indicator only rapid flashes when warm? It seems reading previous comments that all others seem to do it in cold weather. Mine of course, has to be opposite.
I'd imagine that there must be a little expansion going on in the unit when warm thus highlighting the failings of a cracked/dry joint or something along those lines.
Looks like it's dismantle and solder time methinks...
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff