Disc's

Author
Discussion

vxkev

Original Poster:

585 posts

116 months

Friday 20th July 2018
quotequote all
Hi as anybody used these discs please what is the dimensions as I am upgrading my cv8 to vxr 2005 many thanks for replies.
http://www.pedders.co.uk/brake-rotor-dba4048s_p456...

Kiwi LS2

202 posts

117 months

Friday 20th July 2018
quotequote all
Hi, I had some fitted recently as a direct replacement for the discs on my VXR, though I can't recall if it was front or back as I changed all four discs.

Seems fine, using the pedders performance pads which don't seem great initially but better after some heat goes into them. Previously on yellow stuffs pads which I found were fine for entertaining road use though messy bd things for brake dust. Pedders pads are very clean in comparison...

If you're not sure on fitting contact Roger via the discussion thingy on the web page or email him. The replies are usually very quick and at least same day.

vxkev

Original Poster:

585 posts

116 months

Friday 20th July 2018
quotequote all
Kiwi LS2 said:
Hi, I had some fitted recently as a direct replacement for the discs on my VXR, though I can't recall if it was front or back as I changed all four discs.

Seems fine, using the pedders performance pads which don't seem great initially but better after some heat goes into them. Previously on yellow stuffs pads which I found were fine for entertaining road use though messy bd things for brake dust. Pedders pads are very clean in comparison...

If you're not sure on fitting contact Roger via the discussion thingy on the web page or email him. The replies are usually very quick and at least same day.
Is the centre part cone shape or square

Kiwi LS2

202 posts

117 months

Friday 20th July 2018
quotequote all
Ah, as it is in the picture on the website? Sorry, probably not much help. Speak to Roger!

vxkev

Original Poster:

585 posts

116 months

Friday 20th July 2018
quotequote all
Kiwi LS2 said:
Ah, as it is in the picture on the website? Sorry, probably not much help. Speak to Roger!
Okay as they look coned I have spoken online to pedders uk and although a bit evasive at first managed to get measurements

fred bloggs

1,308 posts

200 months

Saturday 21st July 2018
quotequote all
Ive just renewed my disks on my hsv vt2

you need to measure if the front are 330 or 343 mm. EBC have the 330 in stock, but not the 343 (fitted to the premium brake package)


I got the 315 rear disks and pads from ebc through hi-spec brakes, but had to get the front 343 mm disks from AUZ and they came in a week .