Identify Coilover make

[Global-i]

Hi

I know this is a long shot, but can anyone identify the make of these coilovers?
There are no markings other than the silver sticker, which says Pressure Gas
They were fitted to a Monaro if that helps at all.

Also regardless of if they can be identified or not, does anyone have any suggestions of who might be willing to tackle a rebuild of them?

TIA

[vxr2010]

you can contact cornering force suspension , if one’s blown are others following ? worth a new set of pedders or BC or Tein ? , i have a standard set of pedders xa coilovers on my cv8 which work very well , the pedders xa are 949£

[Global-i]

vxr2010 said:

you can contact cornering force suspension , if one’s blown are others following ? worth a new set of pedders or BC or Tein ? , i have a standard set of pedders xa coilovers on my cv8 which work very well , the pedders xa are 949£

I just wanted to see if they could be rebuilt, they still work fine at the moment (even thought they look a little tired), however they are probably well past the maintenance rebuild scheduled.
My current thinking is the Pedder's XA remote canister setup, as a replacement should I need to. I will however contact cornering force suspension to see what they can do.

[stevieturbo]

Bracketry, design, colours don't really look like Pedders though



https://pedders.co.uk/remote-cannister-adj-coilove...

[Global-i]

stevieturbo said:

Bracketry, design, colours don't really look like Pedders though



https://pedders.co.uk/remote-cannister-adj-coilove...

Sorry the above is a bit confusing, What I meant to say was, if I replace them it would be with a Pedder's XA set.
In terms of what make they may be, Monkfish some time back suggested AVO however AVO say they are not theirs. So aside from that I have no idea.

Edited by Global-i on Saturday 14th May 10:30

[99PBATR]

Not Pedders I don't think and have an external reservoir. Look like a similar type of shock to Ollins but aren't. I can't recall but I think Gaz Shocks may rebuild other shocks

[monkfish1]

Global-i said:

stevieturbo said:

Bracketry, design, colours don't really look like Pedders though



https://pedders.co.uk/remote-cannister-adj-coilove...

Sorry the above is a bit confusing, What I meant to say was, if I replace them it would be with a Pedder's XA set.
In terms of what make they may be, Monkfish some time back suggested AVO however AVO say they are not theirs. So aside from that I have no idea.

Edited by Global-i on Saturday 14th May 10:30

Look like AVO. Except for the resevoirs.

[ninjasta]

Since they've likely for a while I suspect that if they they aren't pedders they would likely be BC racing or Walkinshaw offetings as they did the remote can 2 wsy adjustable coilovers.
Tein only did street application for the Pontiac G8 and us gto - no temote cans. And are green power coated. Which stands up to use.
Pedders xa weren't available early on in uk market as far as i know but did use red paint.
Avo didn't do an off the shelf application so would be very expensive one off so unlikely.