rt/10 alarm set

[steve09]

Hi,wondering if anyone can help me on this topic,ive got a viper RT/10 1994 uk car and the battery has gone flat and now is coming up with alarm set on the dash and all lights flashing.
The thing is i have lost the key fob alarm and can no longer turn off the immobilizer,to start the car,has anyone had this problem before or is their anyone who knows how i can turn this off,anything will help thanks steve....

[Dr-Bob]

Hi steve
You will need the OE factory remote to turn it off....
They are getting expensive and hard to get hold of now, Sold my last one a few months ago...

Try contacting Chuck Tator of tators garage NY AKA Viper wizard...

[steve09]

have you got a contact number for him?

[Dr-Bob]

Tator's Garage
20 Spring Street South
South Salem,
NY 10590
Phone [phone]

Tell him Baz sent you.....

[steve09]

hope he does'nt want me to take it to him,i live in manchester,england

[Viper]

once you get the remote its needs programming to your car,
so it will be a trip to your local Chrysler/Dodge dealership

unless Dr Bob can tell you away of doing it yourself

get yourself a battery tender, and youll never have the hassle of a flat battery
again

[Dr-Bob]

Drop me a mail with your no and i'll call you tomorrow.....

Gen 1's can be done without a trip to the dealership....

Edited by Dr-Bob on Monday 28th November 22:13

[steve09]

Cheers pal,what time will it be around you will ring?

[Dr-Bob]

midday ok

[steve09]

Sound great mate speak tomorrow,cheers

[viper-bry]

hi guys

i have the same problem here.....only i have key fob.

Baz.....i have tried reprogramming as per the manual...but doesn`t seam to have any effect.

should something happen during the reprogramming.

so far this is what i have...
with battery connected and fully charged....
alarm set on dash and lights constantly flashing.
car will turn over and start, but dies straight away.

i have tried both remotes with new batteries fitted...cant get them to do nothing.
can you suggest anything, or anything i might not be doin correct with re-programming.

when i try the re-programming , dont get any reaction or change in lights.

had a similar problem last year but it seemed to right itself....car was them fine all year.


best regards

brian

[Leatherman]

Brian send a pm to steve-indy on the VCA site, explain the problem in detail and he will probably be able to help you.

[viper-bry]

ITS ALIVE !!!....ITS ALIVE ...!!!

I finally got the alarm cleared!.....and i did it without the remote fob.
What a sweet, sweet sound has returned to my ears!
I now have 2 new problems though...

1.
Either my remote is duff.....it could be...its 20 years old, or the receiver box is duff.
The remote/alarm has been a bit twitchy ever since i had the car.
Any suggestions on testing either remote or receiver would be appreciated.

2.
What should i do with the information i have about resetting the alarm without the remote fob.?
Obviously this is very powerful information, as in theory, it would allow anyone to disarm a viper....even if they don`t own a viper, if you know what i mean.
Any comments and suggestions welcome.



Brian

[Leatherman]

viper-bry said:

ITS ALIVE !!!....ITS ALIVE ...!!!

I finally got the alarm cleared!.....and i did it without the remote fob.
What a sweet, sweet sound has returned to my ears!
I now have 2 new problems though...

1.
Either my remote is duff.....it could be...its 20 years old, or the receiver box is duff.
The remote/alarm has been a bit twitchy ever since i had the car.
Any suggestions on testing either remote or receiver would be appreciated.

2.
What should i do with the information i have about resetting the alarm without the remote fob.?
Obviously this is very powerful information, as in theory, it would allow anyone to disarm a viper....even if they don`t own a viper, if you know what i mean.
Any comments and suggestions welcome.



Brian

Did you get the info from steve-indy ??

[Dr-Bob]

If there is a different way to the way we discussed i would like to know please.

All the ones i have done worked the way talked about. I'm sure everybody here will back me up for having the info....

Baz

PM me for my mail address if you can send the info..

[Ginja]

viper-bry said:

What should i do with the information i have about resetting the alarm without the remote fob.?
Obviously this is very powerful information, as in theory, it would allow anyone to disarm a viper....even if they don`t own a viper, if you know what i mean.
Any comments and suggestions welcome.

I would suggest that this information is retained by you for your use only. Those who need to know it know where to go to get it

[Leatherman]

Dr-Bob said:

If there is a different way to the way we discussed i would like to know please.

All the ones i have done worked the way talked about. I'm sure everybody here will back me up for having the info....

Baz

PM me for my mail address if you can send the info..

Yes I agree the info should go to the Viper depositary of the good Doc

[ViperDave]

I'll vouch for baz to have the info also, and if when he has it and he thinks it may also work on a gen2 EEM then can he pass it on to me as i have and EEM that refuses to learn a new fob after all the usual tricks. Its been replaced now but would be good to see if I can get it working again as it otherwise functions fine.

[viper-bry]

So that anyone with a locked out alarm and no working remote can get help, i have emailed Baz (DR-BOB) the information.
I know Baz will distribute it wisely.

Thanks to all for there help and input.

Brian.

[Dr-Bob]

Cheers Bryan......


Under lock and key......