Fuel line dry break location - PR6?

[dunc_sx]

Just wondering where these are located, my 2010 PR6 doesn't seem to have one unless I'm being blind

Planning to fit one over the winter.

Cheers,

Duncan.

[Josh Smith]

Fuel rail or just before the pressure reg chap

[dunc_sx]

Thanks Josh, OK to drain the tank through it by running the pump or is an external pump required?

Cheers,

Dunc.

[Josh Smith]

Yes you can use in-tank pump.There will be a 2 pin sureseal connector in your loom, labelled 'aux fp' or 'pump out' somewhere, mine is above the batteries.

You can then run a feed to the pump without having any other part of the car live.

[dunc_sx]

Appreciated, thanks

[Gc285]

I fitted a fused switch to both my cars connected to the loom by 2 pin connector that is located just behind near side of bulkhead. I believe only 1 needs connecting from memory. Makes pump out so easy

[dunc_sx]

Yeah I'll definitely need something similar, thanks