Identify Brake Master cylinder

[NedFlanders]

Hi All,
I have been trying to identify my brake master cylinder on my TVR 350SE for replacement.
Through various forum and club sites a Ford Cortina/ Capri has been mentioned but looking on ebay the pictures do not look the same as mine. There are two outlet pipes to the side and one underneath at far end from servo.
The casting number on the side looks like GIRLING 74660294-8-0330, but I cannot find any reference to this number ( see Photos) Any suggestions?

[mrzigazaga]

Hi Ned

This was posted up on the Wedge FB group recently....

Part number BMC4259
https://www.google.co.uk/url?sa=t&rct=j&q=...

Hope this helps


Ziga

[pasogrande]

Hi Ned,

I have the same question for my US Spec 280i, which has the same master cylinder. I only need the plastic reservoir.

Wilf.

[pk500]

Wilf the new master cylinder don't come with a resovior

[mrzigazaga]

Hi Wilf.

I think the plastic reservoir was from a Cortina mk3, A Ford Taunus might be similar but dont think it has a sensor in the cap...I did hear that the cap is from something else...Not sure how true that is...


Hope you are well.


Regards


Ziga

[NedFlanders]

Hi all, thanks for all your comments
NedFlanders

[wild rover]

Check Burton power for Capri 2.8 master cylinder

[Grady]

Wilf - I just got a master from Bill @ Dominion. He probably has the plastic reservoirs too though I didn't ask.