New Lenso Rims
Discussion
Yes.
If I remember correctly I bought the 70mm like these https://www.ebay.co.uk/itm/TVR-Pearl-Logo-Blk-B-G-... they needed sanding down by about 1mm to fit snuggly.
If I remember correctly I bought the 70mm like these https://www.ebay.co.uk/itm/TVR-Pearl-Logo-Blk-B-G-... they needed sanding down by about 1mm to fit snuggly.
Jonny TVR said:
Thanks Steve, Just had a quote from Gary on them. Do they rub at all? Are there any negatives? did you use different wheel nuts? Whats the ride like?
No rubbing from mine and only positives from me. The ride is still fine although I did have new Bilsteins fitted at the same time.
They were put on by Str8six while it was in for stuff but I'm pretty sure they used the same wheel nuts?
As a plus the larger size has turned my wildly inaccurate speedo into producing a very accurate reading
As for looks I cannot see me ever putting back on the Estorils as these suit the car IMHO much better and have turned a stunning car into a super stunning beauty BTW I'm keeping the Estorils for the next owner (not for sale)
You won't regret it it if you go ahead the transformation is huge, my mate thinks they're the best thing I've ever done to any of my cars
Fitted them yesterday. Very pleased with them. They are very lightweight. The fronts have 205's on versus the 225's that were on. From memory griffs without PAS had 205's originally. It shouldn't make too much difference. Haven't driven on them yet. just calculated the diameters of the wheels before and after.
Fronts:
Before 23.9 inches
After 24.1 inches
Rears
Before 24.7 inches
After 25.7 inches
Thats an extra inch in diameter on the rear, so adds 1/2 inch to the height. I wonder if I should get my set up looked at? I noticed on the rears that there seems like just a hairs gap between the wheel and caliper but they don't seem to rub.
[url]
|https://thumbsnap.com/YAt8O5yp[/url]
Fronts:
Before 23.9 inches
After 24.1 inches
Rears
Before 24.7 inches
After 25.7 inches
Thats an extra inch in diameter on the rear, so adds 1/2 inch to the height. I wonder if I should get my set up looked at? I noticed on the rears that there seems like just a hairs gap between the wheel and caliper but they don't seem to rub.
[url]
|https://thumbsnap.com/YAt8O5yp[/url]
Edited by Jonny TVR on Monday 21st January 08:37
Edited by Jonny TVR on Monday 21st January 08:47
Gassing Station | Griffith | Top of Page | What's New | My Stuff