Looking for photos of how to install standard headlights
Discussion
Hey folks,
I need your help.
I bought a Chimaera in which the previous owner had installed headlights from another vehicle because the correct TVR headlights are no longer available.
In the meantime I have been able to get original reflectors and lenses, including adjustment screws.
But I don't know how the reflectors were attached with the screws.
Can you help me with photos of what it all looks like when assembled?
I would be very grateful to you.
Many greetings from Germany
Stefan
I need your help.
I bought a Chimaera in which the previous owner had installed headlights from another vehicle because the correct TVR headlights are no longer available.
In the meantime I have been able to get original reflectors and lenses, including adjustment screws.
But I don't know how the reflectors were attached with the screws.
Can you help me with photos of what it all looks like when assembled?
I would be very grateful to you.
Many greetings from Germany
Stefan
Hello Mark,
At first I also thought that the adjustment was done using the wing nut on the back. But I think that is a misconception.
The adjustment is made from the front when the painted plastic cladding has not yet been installed. You can use the scremwdriver to get past the lens and turn the screws.
Many greetings from Germany
Stefan
At first I also thought that the adjustment was done using the wing nut on the back. But I think that is a misconception.
The adjustment is made from the front when the painted plastic cladding has not yet been installed. You can use the scremwdriver to get past the lens and turn the screws.
Many greetings from Germany
Stefan
Gassing Station | Chimaera | Top of Page | What's New | My Stuff