TVR parts suppliers/TVR Parts Ltd

[greymrj]

For those of you who were not already aware, TVR Parts Ltd have been buying in other interests. The stock held by David Gerald went to TVR Parts some time ago, and the stock held by Obsolete TVR went recently. Neither now hold TVR parts.
The current problem is that most of these parts appear not to have been sorted or catalogued yet, so there is a temporary problem in getting at the parts! I am trying to get at some parts that were known to be on stock with David Gerald but are now somewhere uncatalogued within TVR Parts Ltd.

Some of us have noticed that TVR Parts Ltd website doesnt even list the S as a TVR model, which I admit I find a bit worrying. I am also a bit worried that the all important knowledge about parts for the older cars may be getting lost.

I hope I am proved unduly pessimistic

(Neil at ML Performance still has stock of some parts which remain accessible to S owners)

Some of you showed interest in a few posts I did some weeks ago about new S parts that had become available, and I was able to put a few of you in touch before a Mod withdrew the posts (the results of my protest on that one showed a Mod jumping to unjustified conclusions, and left a bad taste in my mouth!). Those were S parts that Mike at Obsolete TVR had found at my request, parts I knew people had been looking for. A couple of people got parts, hopefully the rest will eventually be listed by TVR Parts Ltd.

I have also sent TVR Parts Ltd the initial details re the rubber bumper section that is no longer available, to see if they would be prepared to commission new stock. Phillpot and I both got quotes which could be considered by TVR Parts Ltd. That is for hard rubber extrusions to exactly match the original. section.

After speaking to the TVRCC I also wrote to TVR Parts Ltd about the servo they are now offering to check compatibilities and suitability for the S. I have yet to get a reply on that one.

[Oldred_V8S]

I must admit I am slightly nervous of having all our eggs in one basket; I thought it a much better situation where we had access to a larger number of suppliers. David Gerald were an excellent source for parts and showed great initiative in the sourcing of parts they didn't have, the V8S speed sensor being a recent point in case.

[djzcarr]

Having had to source a lot of parts for my S over the past few months it is a worry how limited TVR Parts are. Almost get the feeling they are not interested on the early cars. I can vouch that the Brake Servo they supply does fit the S as I fitted one into mine on Tuesday.

[phillpot]

I suspect that in the "scale of things" a few dusty old S Series parts are not going to get top priority? Luckily the majority of S parts, certainly main service/wear items, can be sourced independently.

[BillC99]

Hi All,
As some of you know I have been rebuilding an S for the last 9 months and have struggled to find some parts.

I don't know if it will be of any use but here is a list of some bits I bought for my 2.9 with the help of my local motor factor.
(I think the staff all hide when they see me coming through the door now!!)

Fan switch Intermotor 50056
Water temp sensor Intermotor 55507
Radiator cap Non Pressure Continental direct CFC 57
Thermostat First Line FTK028
Fan Belt Gates 6227MC
Bottom Ball Joint First Line FBJ5138
Tie Rod End First Line 4040

MOT Tomorrow, the first for 15 years!

Fingers crossed.

[phillpot]

What we need is a "volunteer" to update and tidy up the alternative parts wiki

[RayTVR]

phillpot said:

What we need is a "volunteer" to update and tidy up the alternative parts wiki

Was just thinking the same thing - Maybe we need a table showing who has obtained what part, but with dates and model type.

Happy to have a go if people will assist in updating?

[AJC77]

RayTVR said:

Was just thinking the same thing - Maybe we need a table showing who has obtained what part, but with dates and model type.

Happy to have a go if people will assist in updating?

I'm happy to add what I have found out sourcing parts for my recent body off resto.

Having worked in the parts trade for too many years if TVR Parts Ltd had a real interest in S series business they would have started offering it by now, especially given they'll be busy generating as much incremental profit as possible to help fund start up for the new model. I hate to say it but we may be on our own fella's... So best we start cataloging and listing part numbers, brands and sources whilst known suppliers are getting hoovered up.

[TVRees]

RayTVR said:

Happy to have a go if people will assist in updating?

We also have this list Pistonheads and maybe we should look at combining both into one definitive list, maybe an Excel file or Google Docs Sheets ?
I'll help in any way I can.

Thanks to Bill for his new parts list and GooD LucK with the MOT

[BillC99]

No problem with sharing the part numbers. I agree the parts list should be updated and I will help wherever I can. I will dig out invoices for other parts and share if it helps.

Bill

[greymrj]

yes, good luck with the MOT Bill and well done for bringing one back to life. There are a few S's that have been brought back to life by PH members, very satisfying it is too!

I found the Alternative Parts List of immense help to me when I restored mine. Sadly it is now well out of date. A complete revision of that list is an option, or would an alternative format be better now? I think we ought to discuss how best to proceed and get it right. I am certainly grateful for the offers of help from people more computer savvy than me. I also think we ought to see if TVR Parts want to be involved in that discussion, I do share the cynicism but if they genuinely do want to preserve the 'heritage' TVR's then they need to know what could be held in stock for S types, and indeed what parts could most usefully be commissioned for stock. I will take on speaking to TVR Parts on this issue.

Wouldnt be a bad idea for TVR Parts to monitor the TVR PH section, they would get a fair idea of what parts issues are of greatest concern to owners.

[BillC99]

Some more part numbers :-

Indicator lens Kia KKY0151073 Both sides

Gearbox mount Burton Power GBT 9400 - This mounts the gearbox a bit high I believe there may be an alternative

Rear Trailing arm bolts 9/16 UNF - Landrover front shackle bolts Liverpool Land Rover Part No 537740

Engine Mounts Burton Power FP 292

Fuel Pressure valve Burton Power FSEPBV 39430

Various gearbox seals Burton Power

Distributor sealing ring F 1490140 I was told Trust Ford of leeds have about 20 left.

Bill

[TopVpowerRoadste]

My little contribution:

OIL FILTER

Fits perfectly and same measurements as the FRAM PH2854:
Make : MANN
Reference: W914/2
Made in Germany
Price: 10,58€ + VAT (21% in Belgium)

Best regards,

Geoffrey

[Barkychoc]

I'm happy to help creating the Wiki documents if that's what you are after.
I did the original owners lists & bolts list from info supplied by Spludge as well as the two paint colour lists around on general TVR I think.

Note there is a limit on how much you can have in a wiki (that's why the owners lists are split).

I'm not fussed either way - if someone else is keen to do it that's fine - if no one is keen I am happy to.

Chris

[greymrj]

Hi Chris, good to hear from you. I wonder if you would be good enough to PM me, I just want a bit of insight into some work done in the past and I do not seem to be able to PM you. Richard

[greymrj]

Some of you may have noticed that TVR Parts Ltd have added and then expanded the list of S parts they now have available.
There are other encouraging signs:

The supply of targa panel sockets (the plastic inserts for the hood hoop and screen top rail) passed over from David Gerald to TVR Parts Ltd was minimal (I got 4 only!). These are needed when a hood or targa panels are refurbished and I know several trimmers were anxious to obtain some. TVR Parts Ltd have however now managed to have these remanufactured for us and they are available again.
They are £4.95 each + VAT , give Martin Slade a call on 03333 237877.

The supply of bumper insert rubber to the original specification was exhausted some time ago. TVR Car Parts have however taken information supplied to them by us and have located a supplier. It is intended to get these remanufactured as soon as other priorities will allow.

I hope they do not arrange the re-manufacturing of front indicator lenses! That would not be welcomed by those of us who have now installed an alternative or those who have stockpiled originals for theor retirement fund!