2005 Subaru

Subaru Impreza wrx blobeye

Road legal MOT’d competition car 29/05/2026 - Will MOT for buyer.

Current reg can be sent on request.

Engine

2.0 EJ20

VF43 Turbo

Remapped to 300bhp/340ft lbs by Russ Paton at MAC Motorsport

Killer B Motorsport 3-Piece Cast Super G-EJ Pan, High Flow Pickup and baffle plate.

Ported and wrapped oem headers

Harvey uppipe

RCM wrapped downpipe

2.5 inch exchaust system

Ninja exhaust backbox with welded in racing cat

1.5 litre Swirl pot

Bosch Motorsport 044 Fuel pump

SWRD "Colossus" 290lph intankFuel Pump

STI intercooler and bonnet scoop + water-spray

Aircon delete, RCM bracket fitted

Pipercross filter

1bar wastegate spring

Genuine Peirburg 3 port bcs

5 Speed newage stronger gearbox

Battery relocated to boot, Odyssey extreme 25 PC680 battery.

Brakes

K sport 330mm 8 point front brakes and discs

Pagid rst3 pads front and rear

Brembo STI rear brake calipers, brembo discs

HEL performance braided brake lines

(Brand new set of front brake discs included)

Suspension

BC Racing RM series coilovers 10/6kg mm

Spare set of 6/5kgmm

Spec C front control arms (3.5 to 5deg castor)

Whiteline extended drop link set

Whiteline extended tie road end set

Whiteline and powerflex motorsport bushing throughout

Whiteline engine dogbone

Whiteline 24mm anti roll bars, front and rear

Spare set of Whiteline 22mm anti roll bars front and rear

Strut brace front and rear

Camber bolts

Wheels

Oem wrx wheels + worn tyres

STI oem wheels + worn Nankang AR1 tyres

Rota Titan 17x8 et42 + Uniroyal Rainsport 3’s 225/40/17

Rota Titan 17x9 et42 + Nankang AR-1 255/40/17

Bodywork

Front custom air dam and splitter, titanium skid plates

Japspeed Carbon Fibre rear wing BGW

3D printed roof vortex generators

Underside rustproofed, back to bare metal, primed, painted, Dinitrol coated.

Aluminium bolt on side skirts

3D printed air inlets for brake cooling

Boot lip spoiler

Interior

Safety devices 6 point bolt in roll cage

2 bucket seats motordrive + low level bolt in seat mounts

TRS 6 point harness

OEM interior parts available.

More photos and information can be sent on request.

Worth mentioning:

This car is not cosmetically perfect, it’s a competition car that is also road legal and could easily be put back to road car spec.

Front right wing has some damage.

Rear diff has a bit of a whine.

Rear suspension top mounts make a knocking noise sometimes, but that’s a well known quirk of BC racing rm series inverted (can be solved with rubber top mounts available from BC), does not effect performance.

Rear arches have been lightly rolled for extra wheel clearance.

Priced to sell.