2014 CHEVROLET CORVETTE

Corvette c7 z51 - 1000-+whp Supercharged - Z06 Aero - over £60k! in engine - 9500k miles

No expense was spared with this build, and in total around £60k in engine parts and modifications alone. It was built by Top Cats Racing who are experts in building Chevy V8's for the race track, they stripped the engine down to the bare block. From there EVERY part possible was upgraded with something bigger, better, stronger than factory Forged pistons, rods, crank, arp studs and bolts, uprated seals, better headgaskets...etc...you know the deal.

The majority of the 1000+whp comes from a Procharger D1-X running a tiny Griptec pulley and pushing out around 25psi. It's also fitted with a Vengeance Racing stage 3 camshaft, ceramic coated Kooks decat headers and lots of other mods to help get the boost in and out of the engine efficiently.

The car was tuned by one of the best Gen-V tuners in the USA ⁃ Goat Rope Garage (at great expense) and as a result any future modifications or tweaks vou might want to make are also covered by this tuner. The car has more than enough fuelling to support the power, however the octane in UK fuel is pretty pants, so it is supplemented with a methanol system (1 will throw in my remaining containers of meth).

In terms of servicing, the car has been treated to yearly oil changes with Amsoil, rear diff and gearbox oil was also recentlv changed with Redline. The Procharger gets a yearly oil change too and I have a few spare containers of oil for future changes. All of this is documented and I have a fat folder of receipts showing all work done.

Engine:

Fuel

Alky Control Methanol Controller

Devilsown injection hardware

Dual 640cc/min methanol nozzles (Pre-T/B)

Single 320cc/min methanol nozzle (Pre-S/C)

Chevrolet LT4 HPFP (+32% cam lobe

XDI LT4 +30% Injectors

MTI Secondary Low-Side Fuel Pump System

Air

Procharger D1-X Supercharger (25+ PSI) w/ Griptec 2.5" Pulley

AirAid 6" Trackday Air Filter

G1Pro long runner sheet metal intake (Ceramic coated)

Chevrolet LT5 95mm throttle body

Weapon-X 365cfm Ported Cylinder Headers with 10.7:1 CR

Tial Q 50mm BOV

LS9 MAP Sensor

Spark

MSD Ignition Blaster Coilpacks

GM Performance Parts Spark Wires

GM Ceramic Coated Spark Plug Boots

NGK Ruthenium Spark Plugs w/ 0.025" gap

Rotating

Vengeance Racing Forged Pistons & Rods

Vengeance Racing Stage 3 Camshaft (+32% fuel lobe)

LT4 Forged Crank

Brian Tooley Racing Dual Valve Spring kit w/ Titanium Retainers

Vengeance Racing Hardened Pushrods

Corvette C5 Racing (C5R) Reinforced Timing Chain

Brass Bushed Rocker Arm Trunions

Chevrolet LS7 Lifters

ARP Engine Bolts & Studs

SacCity Corvette Billet Oil Diverter Barbell

Uprated Main Seals

LT4 MLS Head Gaskets

Exhaust

Kooks Decat Ceramic Coated Headers (2" Primaries)

Kooks 3" Decat x-pipe

ARP Header studs

OEM axleback with exhaust valves

Other

Monster Triple Plate 1500whp Clutch

Mighty Mouse Catch Can

WeaponX Valve Covers

Red Silicone radiator hoses

AMP billet thermostat housing with 172deg thermostat

CSF triple row Aluminium radiator

Appearance

Carbon Fibre Convertible Roof

Lightweight Racing Lug Nuts

Corvette Z06 Front Grille

Corvette Z06 Stage 3 Rear Spoiler

Corvette Z06 Stage 3 Front Splitter

Corvette Z06 Stage 3 Style side skirts Black Emblems

Oracle Side Markers

Rear Light Blackouts

ACS extended Mud Guards

Cleartastic Stone Chip protection

Michelin PS4 Tyres( 6MM Thread)

Electronics

Dashlogic

Ballenger Motorsports AFR500 Wideband

Mild 2 Wild exhaust valve controller

Any questions, contact me on 07783497093

Looking for £59,995ono