Number plate query - split over 2 lines?
Number plate query - split over 2 lines?
Author
Discussion

tvrolet

Original Poster:

4,771 posts

313 months

Thursday 26th December 2013
quotequote all
I'm trying to find out if there are any limitations on where the registration is 'split' on a motorcycle plate. The government leaflet INF104 just says "The number plate must be a “2-line” number plate". So if you had a registration such as AB12XYZ could it be presented as, for example,

AB12X
YZ

I can't find anything that says the registration has to be split over 2 lines after the 2 numbers only, or that the 3 letters must be kept together on the same line.

bimsb6

8,808 posts

252 months

Thursday 26th December 2013
quotequote all
Plod around here used to split the reg over 3 lines .

SmithyAG

300 posts

159 months

Thursday 26th December 2013
quotequote all
I thought the letters and numbers were divided into group a and group b. So on a standard car the gap between the 2 is defined and should not be moved to another point. Surely it follows that two line plates either car or bike would have to be split at the same point?

LoonR1

26,988 posts

208 months

Thursday 26th December 2013
quotequote all
Legal would be

AB12
XYZ

One line or different splits won't be legal but will you get pulled? Probably not. Few bikers care about small plates or loud exhausts and rarely get pulled for them. Personally I prefer standard as no reason to attract further attention IMO.

shovelheadrob

1,564 posts

202 months

Thursday 26th December 2013
quotequote all
If it's any help I had a 12x6 plate on a vehicle, legal on the vehicle it was displayed on & with correct font etc, 2 lines with the split in the wrong place, I got a warning from a friendly plod.

Cat

3,134 posts

300 months

Friday 27th December 2013
quotequote all
tvrolet said:
I'm trying to find out if there are any limitations on where the registration is 'split' on a motorcycle plate. The government leaflet INF104 just says "The number plate must be a “2-line” number plate". So if you had a registration such as AB12XYZ could it be presented as, for example,

AB12X
YZ

I can't find anything that says the registration has to be split over 2 lines after the 2 numbers only, or that the 3 letters must be kept together on the same line.
Regulation 13 of the The Road Vehicles (Display of Registration Marks) Regulations 2001 along with parts 1 & 2 of Schedule 3 of the same regs define the permitted layout of registration marks on various vehicles. What you are suggesting is not allowed.

Cat

blank

3,767 posts

219 months

Saturday 28th December 2013
quotequote all
Just out of interest, what if you had a very short (2/3 digit) plate?

Would it have to be:

A
1


Rather than:

A1


?

Cat

3,134 posts

300 months

Saturday 28th December 2013
quotequote all
blank said:
Just out of interest, what if you had a very short (2/3 digit) plate?

Would it have to be:

A
1


Rather than:

A1


?
Either layout is permitted.

Cat

crystaltips

41 posts

109 months

Wednesday 10th October 2018
quotequote all
So if I have my plate "NN LL" (where NN are the numbers and LL are the letters) can I display it on one line providing the spacing and letter size is according to those required?

Red Devil

13,534 posts

239 months

Wednesday 10th October 2018
quotequote all
On a bike? No. See Section 13(2) - http://www.legislation.gov.uk/uksi/2001/561/regula...
Then look at the diagrams in Schedule 3 - http://www.legislation.gov.uk/uksi/2001/561/schedu...