K series dry sump

[Jack_and_MLE]

Hello All

I would like to know if there is among us an owner around Abingdon / Didcot / Oxford who has a K series with dry sump and bell tank who could let me have a look at his or hers installation.

I'm nearly finished my installation and I need some information on the best way of running the pipe from the pump to the tank

Cheers

Jack

[Incorrigible]

There's only really one way it can go under the plenum / bodies and into the top of the tower ??

However tank exit (feed to the sump/oil pump) can go either inside or outside the scavenge piping (my preference is to run it outside the scavenge piping as although it's probably no as tidy you can change a clutch without splitting the bell tower fully from the engine)