Keeping the dizzy dry!

[kentishS2]

I just thought I'd mention this....

Seen a few reports in the past about the dizzy getting soaked after rain from water running down the screen and onto the bulkead by the wipers and over the cap and leads. Resulting in poor running and misfires.

I don't appear to have this water problem because I have a rubber trim stuck to the inside of the bonnet and this seals against the bulkhead below the screen and wiper arms. Should be easy and cheap to fit.

Hope this helps some!

>>> Edited by kentishS2 on Monday 2nd August 15:49

[bridgdav]

Its on mine as well....

I don't know if its standard from the factory...? Then again TVR..

looks like the same woolies trim as the inner wheel arch.

Dave

[mgaut]

but, out of interest, not an option on the "chimera" style bonnets like mine.