Out riggers clean up

[pies]

Did this about a couple of months ago.Sorry for the delay but i wasn't sure anybody would be intrested.

Basically you're going to get dirty (not a job for models Podie)

Tools i used to clean up were a screwdriver, hacksaw blade, various scraping instruments,emery cloth and a pipe cleaner pictured below.

The pipecleaner was a supurb tool it could be shaped over the pipe (near the cross bar)and worked along the pipe.It can also clear out all the rubbish accumilated behind the wheel arch,if like me you can't remove your wheel archthen i run over it with some emery cloth,this wont be repeated for the second coat as it will just remove the waxoyl already there

Mask off the body work either side of the pipe work you can then use a brush to force the waxoyl etc right over the top.

These pics were taken today and as you can see all the stuff is still on.

The type of waxoyl used was "underbody seal" i only bought a small tin and probably have enough for a second coat

I'll the repeat the process sometime this week,you cant have enough waxoyl on your chassis

HTH








>>> Edited by pies on Monday 15th September 14:13

[Podie]

When you're done Pies... I need help with mine.

Don't want to break my nails...

[WildfireS3]

Anybody in the Newcastle area want to give me a hand?

[Podie]

WildfireS3 said:

Anybody in the Newcastle area want to give me a hand?

>> Edited by Podie on Monday 15th September 15:11

[WildfireS3]

Podie said:

WildfireS3 said: Anybody in the Newcastle area want to give me a hand? >> Edited by Podie on Monday 15th September 15:11

"Sigh" Well I walked into that one didn't I? At least it wasn't a nob gag.

[S3 Kieran]

Pies - suggestion to save on pipe cleaners next time - extended mudflaps made out of any old bit of rubber. Seems to keep the cr*p buildup in the front corners down.........

[DennisTheMenace]

Pies mate , its the wrong colour , the front bits red

[pies]

Wondered when you would turn up Denny

What colour the rear?

[gadgit]

Pies, Hope you remembered to cut out the rubber in the corner of the outriggers as per the BIBLE.
This really does help them keep dry!.

And if anyone else has not done it, do it now!

gadgit.

[pies]

Twas already done,and yep i checked it was clear too

Who fancies painting my rear

[DennisTheMenace]

Just thought you might have been painting all of the chassis red .

:getscoatandshufflesbacktobikerbanter: