CHANGING THE ENGINE COOLING THEROMSTAT ON S3
Discussion
I never drained the system when I changed mine..
I just undone the three bolts pulled the cover off, (all the water in the engine drained out on to the floor !!) replaced the thermostat and bolted it back together again.
I then just topped the water up in the swirl tank.
Not sure if this is the right way but it worked for me !!..
I just undone the three bolts pulled the cover off, (all the water in the engine drained out on to the floor !!) replaced the thermostat and bolted it back together again.
I then just topped the water up in the swirl tank.
Not sure if this is the right way but it worked for me !!..
Gassing Station | S Series | Top of Page | What's New | My Stuff




