Rollbar

[s1.5f]

Anyone know of or got a rollbar for an S2 they don't want/never fitted?

[gadgit]

You could strengthen my hardtop thats up for grabs!

gadgit.

[roy c]

Did anyone ever make a rollbar for the S1/2?

It would need to be a different shape to the S3 (Rollcentre) version or the V8S.

[s1.5f]

roy c said:

Did anyone ever make a rollbar for the S1/2? It would need to be a different shape to the S3 (Rollcentre) version or the V8S.

I thought the chassis was identical for the S1 to 3 and only changed with the S4C and V8

[roy c]

s1.5f said:

roy c said: Did anyone ever make a rollbar for the S1/2? It would need to be a different shape to the S3 (Rollcentre) version or the V8S. I thought the chassis was identical for the S1 to 3 and only changed with the S4C and V8

I think the rear bulkhead (behind the seats) is further back on the S3. The uprights on an S1/2 version would need to be further forward.

[s1.5f]

roy c said:

s1.5f said: roy c said: Did anyone ever make a rollbar for the S1/2? It would need to be a different shape to the S3 (Rollcentre) version or the V8S. I thought the chassis was identical for the S1 to 3 and only changed with the S4C and V8 I think the rear bulkhead (behind the seats) is further back on the S3. The uprights on an S1/2 version would need to be further forward.

I'll have to check with rollcentre as I'm not happy about taking my little lad out in his carseat without a rollbar!

[greenv8s]

roy c said:

I think the rear bulkhead (behind the seats) is further back on the S3. The uprights on an S1/2 version would need to be further forward.

I haven't spotted this, are you sure about it? If it has moved, I think worst case it would require a different bend in the front legs to follow the bodywork, doesn't strike me as particularly difficult/expensive to do. I suggest you give Tower View a call as these are the people who supply/fit the bars and I suspect they've done most of the S series models now.

[JSG]

Tower View roll bars DO fit S1 and S2. The difference is in the door length and not rear shelf.

[tvrmark]

The rear bulkhead (behind the seats) is further back on the S3, but the (Rollcenter) rollbar bolts to the chassis where the seat belt spool was, which I believe is in the sae place on all S's up to S4.