283mm discs and TVR AP 4 pots

[magpies]

just thought I'd post a couple of fotos of my new front brakes

[900T-R]

Lovely. Are these the early Cerbera callipers (the ones that go with the 29x mm front discs)? Do you have a template for the adapter brackets?

[techbotics]

Excellent

[magpies]

I dont have a template but should not be difficult to measure.
The only difficultish part was the radiussed end as can be seen in the photo

[clarenceboddiger]

Those look absolutely great, I will just add a cautionary note to be carefull at first as when I refurbished my standard set up, I found I had no problems locking the front end up, those look like they could stop a train.

[Spathodus77]

Great job! Do you have a make/part number for the discs and what are the calipers from?

Thanks,

Ralph.

[magpies]

HiCB

I've converted the rear to cossy discs and calipers and I'm putting in an adjustable bias valve just in case there is an imbalance

And there is a hydraulic handbrake



and the 4.2 LSD

Edited by magpies on Saturday 10th April 17:22