Discussion
Cortina. There are two int. dia.s and you need the larger although I suspect that you need the bracket which is also Cortina (and of course the same for both bushes.) Whilst you're at it why not fit some uprated bushes?
www.superflex.chriswitor.co.uk/
www.superflex.chriswitor.co.uk/
It is unusual for the 2 ARB to chassis bushes to 'fall off'.
They are a split bushes (2 in total) held in place by a clamp with a single screw. It is common for these clamps to come loose which allows the bush and roll bar to move. Suggest you check clamps are in position and tight.
I think these are all Cortina parts but there are at least 2 diameters of roll bar - you need the correct sized bush.
Not sure if bushes are available from Ford - perhaps TVR factory and certainly Superflex.
All replies assume you have a car with the roll bar in front of the suspension - some early cars had the ARB to the rear of the wishbones.
David
They are a split bushes (2 in total) held in place by a clamp with a single screw. It is common for these clamps to come loose which allows the bush and roll bar to move. Suggest you check clamps are in position and tight.
I think these are all Cortina parts but there are at least 2 diameters of roll bar - you need the correct sized bush.
Not sure if bushes are available from Ford - perhaps TVR factory and certainly Superflex.
All replies assume you have a car with the roll bar in front of the suspension - some early cars had the ARB to the rear of the wishbones.
David
Speed Matters | Wedges | Top of Page | What's New | My Stuff




