Need another part

[gsx600]

Well I'm after a very strange part here and looking for help !

Between my oil pressure sender and the oil pump plate sat a brass reducer which split when removing and is now in 2 pieces

Without this proving very difficult to check pressure on new engine

Anyone know where I can get hold of one, has a spare or even know what thread size so I could get one engineered ? It seems to be some sort of
1/2 inch male on the oil pump plate &
3/8 or 10mm female for the pressure sender to connect to

[iainjones]

Dont know if this helps, www.pirtek.co.uk/site/English/HTML/techData/techdata_measureingthread.asp?lang=1&pdf=techdata_measurethreadends.pdf

sorry if its teaching you to suck eggs. can get thread guages from autofactors/machine mart cheaply enough

Regards
Iain

[gsx600]

Strange that I visited pirtek yesterday with the bits and the guy behind the counter didn't have a clue, perhaps I should have taken that into them to measure it properly ?

[wedg1e]

Might well be something in BSP.... or could be BSP to Metric reducer...