Will it make it.

[redcar]

Car in Austec tomorrow evening for bigger injectors, 38mm flared trumpets and another session with Mark Adams on rolling road.
Big question is, will it make 300bhp which would be an increase of 22bhp and 310ft lbs torque which will be an increase of around 18ft lbs.
Mark thinks its possible, cant wait.:

[rev-erend]

Martin - good luck. I hope it makes those figures too..

[gsx600]

Hope you make the 300 figure at the wheels

Be interesting to see as my 4.5 BV also has lower trumpets, larger plenum and jag air flow meter / injectors, but still on original 4.5 ecu - Just got to get it running if only roughly to check everything out

Does Mark Adams adjust the original or do you need a different ecu for hom to mod ?

[redcar]

[quote=gsx600]Hope you make the 300 figure at the wheels

OOOH I wish.:

[redcar]

Does Mark Adams adjust the original or do you need a different ecu for hom to mod ?[/quote]

We are using the original ECU but I had Tornado chip fitted a couple of months back, plus larger airflow meter and re-routed silica inlet hose,(much shorter about 3" long, air filter now by position of water tank and tank where filter was, its supposed to be much cleaner airflow at that point). Can send photo of it if you would like, I now get a lovely sucking noise when you acelerate hard.
No rude comments please :

[redcar]

rev-erend said:

Martin - good luck. I hope it makes those figures too..

If it doesnt I'll drive off quick without paying ::

[rev-erend]

Martin

Don't forget to give Mark the BBWF polo shirt package..

[redcar]

rev-erend said:

Martin Don't forget to give Mark the BBWF polo shirt package..

Will do