OZ split rim sizes?

[LeeBee]

Can anyone tell me how many different sizes the OZ split rims were made in and offsets etc

I thought there was just a 15" (SE Wedge) and 16" (Tuscan racer?) version but I was told by the factory today that there were a few different widths?

Cheers

LeeBee

[stainless_steve]

Mine are 16" OZ split rims,but not off a Tuscan racer.So i guess i have just made things worse for you
As for width,8,8.5,9,10inch wide,i think.
Someone who knows what they are talking about will answer better.

[2 sheds]

You've got the idea Steve, but there was also a narrower version 7" (5 spoke) used on early 390's
400's used 8" SEACs 8.5" very special SEACs used even bigger
Tim

[LeeBee]

Yes completely confused now! all I know is the ones I am after would have been 15" and had 225/50 tyres fitted

Cheers

LeeBee

[2 sheds]

LeeBee said:

Yes completely confused now! all I know is the ones I am after would have been 15" and had 225/50 tyres fitted Cheers LeeBee

either 8" or 8.5" then

Tim

[LeeBee]

Thanks Tim, most probably 8"

Cheers

LeeBee

[19560]

LeeBee said:

Thanks Tim, most probably 8" Cheers LeeBee

Do you have a wedge now LeeBee? IIRC some (350SE?) have 15x7.5 rims.

[19560]

2 sheds said:

LeeBee said: Yes completely confused now! all I know is the ones I am after would have been 15" and had 225/50 tyres fitted Cheers LeeBee either 8" or 8.5" then Tim

You're probably correct but they could be 7 or 7.5 with that tyre size on. (Sorry LeeBee.)

[jvaughan]

I have a set of the 16inch wheels ... The 10" wide ones, I have 245x45x16 rubber fitted to them, but could probably get a 265 tyre to fit easily (Not sure that the body would take such a wide tyre though, as the rears rub when the 245's are fitted under hard cornering and hard acceleration.

Its taken me almost 4 years to collect a good quality set.
My 15" standard wheels are 8.5J Wide I believe.. running 225x50x15 rubber

[19560]

jvaughan said:

The 10" wide ones, I have 245x45x16 rubber fitted to them, but could probably get a 265 tyre to fit easily

Yes, or a 275 but have a chat to stainless. It's virtually impossible to get 16" rubber wider than 245 unless you have a batch made up specially - two of you may reduce the price slightly.

>> Edited by 19560 on Tuesday 14th September 08:20

[tasmania]

LeeBee,
Sorry for late interjection I've been out of the loop a while.
I have a set of OZ split rims identical in style to the 400SE but come off a Merc. They are 16" x 7" and currently have 245 tyres on them. They sit nicely on the 350 but need a spacer to look right on a 400.
I would sell them.
TaS