400 SE Steering wheel boss

[Jack Valiant]

Hi All...I have searched to see if this has been discussed before with no luck so here goes..

I have fitted what I presume is the standard 'Personel' wheel on my 400 SE which is now getting tatty. This has 2 holes at the top in the straight ahead position. I have recently aquired a replacement which has been fitted to a Wedge which is the Momo type of wheel with a single hole at the top in the straight ahead position. I assume that I will need to a aquire a suitable replacement boss to accept the different type of wheel. Does anyone have one, or know of a source of a boss to suit the steering wheel?

Any help would be greatly appreciated - Chris

[400sedave]

My 400 had the std wood rimmed wheel when i bought it, which i changed for a momo wheel. The momo wheel fitted the standard boss just fine. Does your momo wheel line up with the holes even if the wheel is at an angle? If so all you need to do is remove the boss and turn it round a notch so that the wheel points dead ahead.
Failing that, halfords can get you any momo boss to order, i think.

[jack valiant]

Thanks... the car is in Austec at the moment as soon as I get it back I will pull off the wheel and check

Cheers Chris