Washer Jets - What were they off??
Discussion
Has anyone done the washer spray bar upgrade to a wedge?
I noticed on the 's' forum there were quite a few, and decided to get meself the citreon BX spray bar - £10 including delivery etc. (citroen part N93780)
Sadly, the holes are drilled on the wrong side, so when you clip the thing to the wiper arm, it squirts the water out away from the screen! I assume the BX has the wiper parked infront of the passenger. So I puts it on the underside of the arm, and it sort of works - at least it is much better than the original nozzles, but there is room for improvement.
Does anyone know what the current model TVR spray bars are from? or any pictures of how to fit the thing would be handy!
-Jim
I noticed on the 's' forum there were quite a few, and decided to get meself the citreon BX spray bar - £10 including delivery etc. (citroen part N93780)
Sadly, the holes are drilled on the wrong side, so when you clip the thing to the wiper arm, it squirts the water out away from the screen! I assume the BX has the wiper parked infront of the passenger. So I puts it on the underside of the arm, and it sort of works - at least it is much better than the original nozzles, but there is room for improvement.
Does anyone know what the current model TVR spray bars are from? or any pictures of how to fit the thing would be handy!
-Jim
Has anyone done the washer spray bar upgrade to a wedge?
I noticed on the 's' forum there were quite a few, and decided to get meself the citreon BX spray bar - £10 including delivery etc. (citroen part N93780)
Sadly, the holes are drilled on the wrong side, so when you clip the thing to the wiper arm, it squirts the water out away from the screen! I assume the BX has the wiper parked infront of the passenger. So I puts it on the underside of the arm, and it sort of works - at least it is much better than the original nozzles, but there is room for improvement.
Does anyone know what the current model TVR spray bars are from? or any pictures of how to fit the thing would be handy!
-Jim
I noticed on the 's' forum there were quite a few, and decided to get meself the citreon BX spray bar - £10 including delivery etc. (citroen part N93780)
Sadly, the holes are drilled on the wrong side, so when you clip the thing to the wiper arm, it squirts the water out away from the screen! I assume the BX has the wiper parked infront of the passenger. So I puts it on the underside of the arm, and it sort of works - at least it is much better than the original nozzles, but there is room for improvement.
Does anyone know what the current model TVR spray bars are from? or any pictures of how to fit the thing would be handy!
-Jim
Hi WedgeGirl, unfortunately I won't be at the Rose and Crown - too much work to do.
On the plus side, I have trawled through all my car parts catalogues, and I found that Vehicle Wiring Products sell a little three nozzle thingy you bolt on, for a whopping £3.40 . I seem to recall Leven selling something similar?
I still favour the spray bar though, as it worked quite well on a tuscan.
-Jim
On the plus side, I have trawled through all my car parts catalogues, and I found that Vehicle Wiring Products sell a little three nozzle thingy you bolt on, for a whopping £3.40 . I seem to recall Leven selling something similar?
I still favour the spray bar though, as it worked quite well on a tuscan.
-Jim
19560 said:
dickieandjulie said:
Can anyone tell me the vehicle the washer jets for a 350SE might be off? Mine is crome with two jetted screws (knackered obviously).
wedg1e said:
Bloody hell, you must be an originality fanatic!
They don't sound original though. Should be jappaned black IIRC.
I just meant that he must be a bit fussy, if it was critical that it had the absolute original part.
If you think the TVR washer jet is obscure, try the Esprit one. It's about 2.5" high, must be off a Volvo artic or something...
Speed Matters | Wedges | Top of Page | What's New | My Stuff



